1 Firmware‐Dumping‐Guide

ryzendew edited this page 2024-10-07 20:18:24 -03:00

Thanks to Candy for providing the guide details & images. Loosely based off of NH Switch Guide.

What you will need:

• The latest release of TegraExplorer (the .bin file)

---

1. Make sure your sysMMC is up to date. If your sysMMC is not up to date, update it through System Settings.

2. Boot your Switch into RCM.

3. Using a Payload Injector, such as TegraRcmGUI or fusee-interfacee-tk, inject the TegraExplorer.bin Payload (like you would with Hekate).

4. Using the joystick and the A buttons, select FirmwareDump.te.

5. Select Dump sysmmc.

6. Wait about 1-2 minutes for the tool to dump your firmware.

7. When the tool finishes, press any button.

8. Select Power off.

9. Remove the SD card from your Switch, and insert it into your PC.

10. A folder containing your firmware should now exist at /tegraexplorer/Firmware/<version-number>