dolphin/Source/DSPSpy/tests/40bit_ins_test.ds

; This test covers the behavior of 40-bit mode with various instructions.
incdir  "tests"
include "dsp_base.inc"

positive_value: EQU #0x1234
negative_value: EQU #0x9876

negative_imem_value_addr:
CW negative_value

; DSPSpy doesn't pre-populating DMEM currently, so instead use these addresses to store values.
positive_dmem_value_addr: EQU #0x100
negative_dmem_value_addr: EQU #0x101
readback_dmem_addr: EQU #0x102

test_main:
	LRI $ar0, #positive_dmem_value_addr
	LRI $ar1, #negative_dmem_value_addr
	LRI $ar2, #negative_imem_value_addr
	LRI $ar3, #readback_dmem_addr
	LRI $ix0, #0
	LRI $ix1, #0
	LRI $ix2, #0
	LRI $ix3, #0

	LRI $ax0.h, #positive_value
	LRI $ax1.h, #negative_value

	SR @positive_dmem_value_addr, $ax0.h
	SR @negative_dmem_value_addr, $ax1.h

	LRI $cr, #(positive_dmem_value_addr / 256)

	SET40
	; Instructions that perform sign-extension
	; $acc0 should alternate between being positive and negative here
	; (though none of these instructions update $sr)

	; [1] ILRR (also ILRRD/ILRRI/ILRRN, not covered)
	ILRR $ac0.m, @$ar2 ; -
	CALL send_back
	; [2] LR
	LR $ac0.m, @positive_dmem_value_addr ; +
	CALL send_back
	; [3] LRI
	LRI $ac0.m, #negative_value ; -
	CALL send_back
	; [4] LRIS
	LRIS $ac0.m, #42 ; +
	CALL send_back
	; [5] LRR (also LRRD/LRRI/LRRN)
	LRR $ac0.m, @$ar1 ; -
	CALL send_back
	; [6] LRS
	LRS $ac0.m, @(positive_dmem_value_addr & 0xff) ; +
	CALL send_back
	; [7] MRR
	MRR $ac0.m, $ax1.h ; -
	CALL send_back
	; [8] 'LN (and 'L, but 'LN lets us set $ix0 to not increment $ar0)
	NX'LN : $ac0.m, @$ar0 ; +
	CALL send_back

	; Instructions that experience saturation
	; $ax1.l should alternate between 0x8000 and 0x7fff.
	LRI $ac0.m, #0x4231
	LRI $ac0.h, #0x12 ; positive
	LRI $ac1.m, #0x2816
	LRI $ac1.h, #0x99 ; negative
	; [9] MRR (again)
	MRR $ax1.l, $ac1.m ; -
	CALL send_back
	; [10] SR
	SR @readback_dmem_addr, $ac0.m
	LR $ax1.l, @readback_dmem_addr ; +
	CALL send_back
	; [11] SRRN (also SRR/SRRD/SRRI)
	SRRN @$ar3, $ac1.m
	LR $ax1.l, @readback_dmem_addr ; -
	CALL send_back
	; [12] SRS
	SRS @(readback_dmem_addr & 0xff), $ac0.m
	LR $ax1.l, @readback_dmem_addr ; +
	CALL send_back
	; [13] 'LSNM (also 'LS/'LSM/'LSN) - the $ax0.l read is not relevant
	NX'LSNM : $ax0.l, $ac1.m
	LR $ax1.l, @readback_dmem_addr ; -
	CALL send_back
	; [14] 'MV
	NX'MV : $ax1.l, $ac0.m ; +
	CALL send_back
	; [15] 'SLNM (also 'SL/'SLM/'SLN) - the $ax0.l read is not relevant
	; Note that 'SL stores to @$ar0, while 'LS stores to @$ar3
	LRI $ar0, #readback_dmem_addr
	NX'SLNM : $ac1.m, $ax0.l
	LR $ax1.l, @readback_dmem_addr ; -
	CALL send_back
	LRI $ar0, #positive_dmem_value_addr
	; [16] 'SN (also 'S)
	NX'SN : @$ar3, $ac0.m
	LR $ax1.l, @readback_dmem_addr ; +
	CALL send_back

	; Instructions that are not affected
	; [17] ADDI
	ADDI $ac0.m, #8
	CALL send_back
	; [18] ADDIS
	ADDIS $ac0.m, #-8
	CALL send_back
	; [19] ANDC
	ANDC $ac1.m, $ac0.m
	CALL send_back
	; [20] ANDI
	ANDI $ac0.m, #0x6666
	CALL send_back
	; [21] ANDR
	ANDR $ac0.m, $ax0.h
	CALL send_back
	; [22] ORC
	ORC $ac0.m, $ac1.m
	CALL send_back
	; [23] ORI
	ORI $ac0.m, #0xfeed
	CALL send_back
	; [24] ORR
	ORR $ac1.m, $ax0.h
	CALL send_back
	; [25] NOT
	NOT $ac1.m
	CALL send_back
	; [26] XORC
	XORC $ac0.m, $ac1.m
	CALL send_back
	; [27] XORI
	XORI $ac0.m, #0x5555
	CALL send_back
	; [28] XORR
	XORR $ac1.m, $ax1.h
	CALL send_back

	; [29] MOVR always sign extends...
	MOVR $acc1, $ax0.h
	CALL send_back
	; [30] ... even in SET16 mode
	SET16
	MOVR $acc1, $ax1.h
	CALL send_back
	SET40

	; Shift instructions - do these see saturated $ac1.m?
	LRI $ac0.m, #positive_value
	LRI $ac1.m, #2
	LRI $ac1.h, #1
	; [31] - for diffs only
	CALL send_back
	; [32]
	LSRNR $acc0, $ac1.m
	CALL send_back
	; [33] Shifts $acc0 by $ac1.m (in the other direction)
	LSRN
	CALL send_back

	; Does LOOP experience saturation?
	CLR $acc0
	LRI $ac1.m, #0x1234
	LRI $ac1.h, #1
	; [34] - for diffs only
	CALL send_back
	; [35] LOOP
	LOOP $ac1.m
	INC $acc0
	CALL send_back
	LRI $ac1.h, #0x99
	; [36] BLOOP
	BLOOP $ac1.m, bloop_last_ins
	INCM $ac0.m
bloop_last_ins:
	NOP
	CALL send_back

	; For the sake of clarity, the same LOOP/BLOOP calls in SET16 mode don't have saturation:
	SET16
	CLR $acc0
	LRI $ac1.m, #0x1234
	LRI $ac1.h, #1
	; [37] - for diffs only
	CALL send_back
	; [38] LOOP
	LOOP $ac1.m
	INC $acc0
	CALL send_back
	LRI $ac1.h, #0x99
	; [39] BLOOP
	BLOOP $ac1.m, bloop2_last_ins
	INCM $ac0.m
bloop2_last_ins:
	NOP
	CALL send_back

	; We're done, DO NOT DELETE THIS LINE
	JMP end_of_test