On error mmap returns MAP_FAILED(-1) not null.
FreeBSD was checking the return correctly, Linux was not.
This was noticed by triad attempting to run Dolphin under valgrind and not getting a memory space under the 2GB limit(Because -1 wraps around on
unsigned obviously)
PowerPC has a 32 bit CR register, which is used to store flags for results of
computations. Most instructions have an optional bit that tells the CPU whether
the flags should be updated. This 32 bit register actually contains 8 sets of 4
flags: Summary Overflow (SO), Equals (EQ), Greater Than (GT), Less Than (LT).
These 8 sets are usually called CR0-CR7 and accessed independently. In the most
common operations, the flags are computed from the result of the operation in
the following fashion:
* EQ is set iff result == 0
* LT is set iff result < 0
* GT is set iff result > 0
* (Dolphin does not emulate SO)
While X86 architectures have a similar concept of flags, it is very difficult
to access the FLAGS register directly to translate its value to an equivalent
PowerPC value. With the current Dolphin implementation, updating a PPC CR
register requires CPU branching, which has a few performance issues: it uses
space in the BTB, and in the worst case (!GT, !LT, EQ) requires 2 branches not
taken.
After some brainstorming on IRC about how this could be improved, calc84maniac
figured out a neat trick that makes common CR operations way more efficient to
JIT on 64 bit X86 architectures. It relies on emulating each CRn bitfield with
a 64 bit register internally, whose value is the result of the operation from
which flags are updated, sign extended to 64 bits. Then, checking if a CR bit
is set can be done in the following way:
* EQ is set iff LOWER_32_BITS(cr_64b_val) == 0
* GT is set iff (s64)cr_64b_val > 0
* LT is set iff bit 62 of cr_64b_val is set
To take a few examples, if the result of an operation is:
* -1 (0xFFFFFFFFFFFFFFFF) -> lower 32 bits not 0 => !EQ
-> (s64)val (-1) is not > 0 => !GT
-> bit 62 is set => LT
!EQ, !GT, LT
* 0 (0x0000000000000000) -> lower 32 bits are 0 => EQ
-> (s64)val (0) is not > 0 => !GT
-> bit 62 is not set => !LT
EQ, !GT, !LT
* 1 (0x0000000000000001) -> lower 32 bits not 0 => !EQ
-> (s64)val (1) is > 0 => GT
-> bit 62 is not set => !LT
!EQ, GT, !LT
Sometimes we need to convert PPC CR values to these 64 bit values. The
following convention is used in this case:
* Bit 0 (LSB) is set iff !EQ
* Bit 62 is set iff LT
* Bit 63 is set iff !GT
* Bit 32 always set to disambiguize between EQ and GT
Some more examples:
* !EQ, GT, LT -> 0x4000000100000001 (!B63, B62, B32, B0)
-> lower 32 bits not 0 => !EQ
-> (s64)val is > 0 => GT
-> bit 62 is set => LT
* EQ, GT, !LT -> 0x0000000100000000
-> lower 32 bits are 0 => EQ
-> (s64)val is > 0 (note: B32) => GT
-> bit 62 is not set => !LT
The Invalid bit on the x87 fpu is sticky, so once a single NaN goes
through the old code on CPUs without sse4.1 all future floats are
mutilated.
Patch to emulate PTEST by Fiora.
Fixes issue 7237 and issue 7510.
Previously using the new "lower 8 bits" registers (SIL, SPL, ...) caused SETcc
to write to other registers (for example, SETcc SIL would generate SETcc DH).
