mirror of
https://github.com/dolphin-emu/dolphin.git
synced 2024-11-15 13:57:57 -07:00
65af90669b
It's a relatively big commit (less big with -w), but it's hard to test any of this separately... The basic problem is that in netplay or movies, the state of the CPU must be deterministic, including when the game receives notification that the GPU has processed FIFO data. Dual core mode notifies the game whenever the GPU thread actually gets around to doing the work, so it isn't deterministic. Single core mode is because it notifies the game 'instantly' (after processing the data synchronously), but it's too slow for many systems and games. My old dc-netplay branch worked as follows: everything worked as normal except the state of the CP registers was a lie, and the CPU thread only delivered results when idle detection triggered (waiting for the GPU if they weren't ready at that point). Usually, a game is idle iff all the work for the frame has been done, except for a small amount of work depending on the GPU result, so neither the CPU or the GPU waiting on the other affected performance much. However, it's possible that the game could be waiting for some earlier interrupt, and any of several games which, for whatever reason, never went into a detectable idle (even when I tried to improve the detection) would never receive results at all. (The current method should have better compatibility, but it also has slightly higher overhead and breaks some other things, so I want to reimplement this, hopefully with less impact on the code, in the future.) With this commit, the basic idea is that the CPU thread acts as if the work has been done instantly, like single core mode, but actually hands it off asynchronously to the GPU thread (after backing up some data that the game might change in memory before it's actually done). Since the work isn't done, any feedback from the GPU to the CPU, such as real XFB/EFB copies (virtual are OK), EFB pokes, performance queries, etc. is broken; but most games work with these options disabled, and there is no need to try to detect what the CPU thread is doing. Technically: when the flag g_use_deterministic_gpu_thread (currently stuck on) is on, the CPU thread calls RunGpu like in single core mode. This function synchronously copies the data from the FIFO to the internal video buffer and updates the CP registers, interrupts, etc. However, instead of the regular ReadDataFromFifo followed by running the opcode decoder, it runs ReadDataFromFifoOnCPU -> OpcodeDecoder_Preprocess, which relatively quickly scans through the FIFO data, detects SetFinish calls etc., which are immediately fired, and saves certain associated data from memory (e.g. display lists) in AuxBuffers (a parallel stream to the main FIFO, which is a bit slow at the moment), before handing the data off to the GPU thread to actually render. That makes up the bulk of this commit. In various circumstances, including the aforementioned EFB pokes and performance queries as well as swap requests (i.e. the end of a frame - we don't want the CPU potentially pumping out frames too quickly and the GPU falling behind*), SyncGPU is called to wait for actual completion. The overhead mainly comes from OpcodeDecoder_Preprocess (which is, again, synchronous), as well as the actual copying. Currently, display lists and such are escrowed from main memory even though they usually won't change over the course of a frame, and textures are not even though they might, resulting in a small chance of graphical glitches. When the texture locking (i.e. fault on write) code lands, I can make this all correct and maybe a little faster. * This suggests an alternate determinism method of just delaying results until a short time before the end of each frame. For all I know this might mostly work - I haven't tried it - but if any significant work hinges on the competion of render to texture etc., the frame will be missed.
43 lines
1.4 KiB
C
43 lines
1.4 KiB
C
// Copyright 2013 Dolphin Emulator Project
|
|
// Licensed under GPLv2
|
|
// Refer to the license.txt file included.
|
|
|
|
#pragma once
|
|
|
|
#define GX_NOP 0x00
|
|
|
|
#define GX_LOAD_BP_REG 0x61
|
|
#define GX_LOAD_CP_REG 0x08
|
|
#define GX_LOAD_XF_REG 0x10
|
|
#define GX_LOAD_INDX_A 0x20
|
|
#define GX_LOAD_INDX_B 0x28
|
|
#define GX_LOAD_INDX_C 0x30
|
|
#define GX_LOAD_INDX_D 0x38
|
|
|
|
#define GX_CMD_CALL_DL 0x40
|
|
#define GX_CMD_UNKNOWN_METRICS 0x44
|
|
#define GX_CMD_INVL_VC 0x48
|
|
|
|
#define GX_PRIMITIVE_MASK 0x78
|
|
#define GX_PRIMITIVE_SHIFT 3
|
|
#define GX_VAT_MASK 0x07
|
|
|
|
// These values are the values extracted using GX_PRIMITIVE_MASK
|
|
// and GX_PRIMITIVE_SHIFT.
|
|
// GX_DRAW_QUADS_2 behaves the same way as GX_DRAW_QUADS.
|
|
#define GX_DRAW_QUADS 0x0 // 0x80
|
|
#define GX_DRAW_QUADS_2 0x1 // 0x88
|
|
#define GX_DRAW_TRIANGLES 0x2 // 0x90
|
|
#define GX_DRAW_TRIANGLE_STRIP 0x3 // 0x98
|
|
#define GX_DRAW_TRIANGLE_FAN 0x4 // 0xA0
|
|
#define GX_DRAW_LINES 0x5 // 0xA8
|
|
#define GX_DRAW_LINE_STRIP 0x6 // 0xB0
|
|
#define GX_DRAW_POINTS 0x7 // 0xB8
|
|
|
|
extern bool g_bRecordFifoData;
|
|
|
|
void OpcodeDecoder_Init();
|
|
void OpcodeDecoder_Shutdown();
|
|
u32 OpcodeDecoder_Run(u8* end);
|
|
void OpcodeDecoder_Preprocess(u8* write_ptr);
|