* bsd: Revamp API and make socket abstract
This part of the code was really ancient and needed some love.
As such this commit aims at separating the socket core logic from the IClient class and make it uses more modern APIs to read/write/parse data.
* Address gdkchan's comment
* Move TryConvertSocketOption to WinSockHelper
* Allow reusing old fds and add missing locks around SocketInternal and ShutdownAllSockets
* bsd: ton of changes
- Make sockets per process
- Implement eventfds
- Rework Poll for support of eventfds
- Handle protocol auto selection by type (used by gRPC)
- Handle IPv6 socket creation
* Address most of gdkchan comments
* Fix inverted read logic for BSD socket read
* bsd: Make Poll abstract via IBsdSocketPollManager
* bsd: Improve naming of everything
* Fix build issue from last commit (missed to save on VC)
* Switch BsdContext registry to a concurrent dictionary
* bsd: Implement socket creation flags logic and the non blocking flag
* Remove unused enum from previous commit
* bsd: Fix poll logic when 0 fds are present for a given poll manager and when timeout is very small (or 0)
* Address gdkchan's comment
* friend: Stub IsFriendListCacheAvailable and EnsureFriendListAvailable
This PR stubs IsFriendListCacheAvailable and EnsureFriendListAvailable call of friend service which close#2896.
Sadly, Super Bomberman R Online is still stuck on the loading screen and keep calling `TryPopFromFriendInvitationStorageChannel`, probably because another issue somewhere.
* Add FW version
* Apply suggestions from gdkchan
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Update IFriendService.cs
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
This PR stub `SetMediaPlaybackStateForApplication` of the am service. Accordingly to gdkchan it's needed by the Youtube app. This is checked by RE aswell.
While I'm looking to the code, I've found some syntax issue, and a little inconsistencie between `ActivateNpad` and `ActivateNpadWithRevision`. Nothing more.
* Add the ability to toggle mute in the status bar.
* Add the ability to toggle mute in the status bar.
* Formatting fixes
* Add hotkey (F2) to mute
* Add default hotkey to config.json
* Add ability to change volume via slider.
* Fix Headless
* Fix SDL2 Problem : Credits to d3xMachina
* Remove unnecessary work
* Address gdk comments
* Toggling with Hotkey now properly restores volume to original level.
* Toggling with Hotkey now properly restores volume to original level.
* Update UI to show Volume % instead of Muted/Unmuted
* Clean up the volume ui a bit.
* Undo unintentionally committed code.
* Implement AudRen Support
* Restore intiial volume level in function definition.
* Finalize UI
* Finalize UI
* Use clamp for bounds check
* Use Math.Clamp for volume in soundio
* Address comments by gdkchan
* Address remaining comments
* Fix missing semicolon
* Address remaining gdkchan comment
* Fix comment
* Change /* to //
* Allow volume slider to change volume immediately.
Also force label text to cast to int to prevent decimals from showing in status bar
* Remove blank line
* Undo setting of volume level when "Cancel" is pressed.
* Fix allignment for settings window code
The .NET 6 changes ended up causing a difference in the way we deserialise and would end up deserializing wrongly.
This commit fixes it by resoring previous behaviour while still fixing the illink warning that caused that change in the first place
* infra: Migrate to .NET 6
* Rollback version naming change
* Workaround .NET 6 ZipArchive API issues
* ci: Switch to VS 2022 for AppVeyor
CI is now ready for .NET 6
* Suppress WebClient warning in DoUpdateWithMultipleThreads
* Attempt to workaround System.Drawing.Common changes on 6.0.0
* Change keyboard rendering from System.Drawing to ImageSharp
* Make the software keyboard renderer multithreaded
* Bump ImageSharp version to 1.0.4 to fix a bug in Image.Load
* Add fallback fonts to the keyboard renderer
* Fix warnings
* Address caian's comment
* Clean up linux workaround as it's uneeded now
* Update readme
Co-authored-by: Caian Benedicto <caianbene@gmail.com>
This PR implements/stubs some missing calls introduced in recent firmware (13.0.0).
- `acc:u0 InitializeApplicationInfoV2` needed by ACNH.
- `aoc:u NotifyMountAddOnContent/NotifyUnmountAddOnContent/CheckAddOnContentMountStatus` checked by RE. Needed by ACNH.
- `IPurchaseEventManager PopPurchasedProductInfo` needed by Dying Light.
Now ACNH 2.0 update is fully playable, and Dying Light can boot further:
* Remove comment from code.
* Added needed RegisterInfo for TODO.
* Forgot to add two words...
* Stop being tired and fixed the one issue.
* Removing suggested line from GDKchan.
* GDK seems to have been incorrect?
* Update Ryujinx.HLE/HOS/Services/Nfc/Nfp/VirtualAmiibo.cs
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Remove a bit of unsafety around
* Regenerate StructArrayHelpers with a max element value of 256
* hle: remove unsafe marker from all struct that had it
* hle: make SoftwareKeyboardRenderer.TryCopyTo safe
* hle: remove unsafety in NpadDevice and remove AllowUnsafeBlocks from csproj
* Revert "Regenerate StructArrayHelpers with a max element value of 256"
This reverts commit f32a6e5be094f50571970eb1116b65c080781d05.
* Introduce ByteArray of various size and use that instead of ArrayXXX to avoid stackoverflow in .NET runtime type resolution
* Use ByteArray more
* Add some missing spaces on Pack = 1 for various structs
* Fix broken logic for TryCopyTo
* Address gdkchan's comment
* Address gdkchan's comment
* timezone: Make timezone implementation safe
* hle: Do not use TrimEnd to parse ASCII strings
This adds an util that handle reading an ASCII string in a safe way.
Previously it was possible to read malformed data that could cause
various undefined behaviours in multiple services.
* hid: Remove an useless unsafe modifier on keyboard update
* Address gdkchan's comment
* Address gdkchan's comment
* Fixup channel submit IOCTL syncpoint parameters
The current arguments worked by happenstance as games only ever submit
one syncpoint and request one fence back, if a game were to do something
other than this then the arguments would've been parsed entirely wrong.
* Address feedback
* Fix race when EventWait is called and a wait is done on the CPU
* This is useless now
* Fix EventSignal
* Ensure the signal belongs to the current fence, to avoid stale signals
It seems that certain games (Link's Awakening, Xenoblade DE) had their fences reached already when posting framebuffers, so the signal that a frame was ready would go out _before_ the frame was enqueued, and the render loop would fail to dequeue anything and "skip" a frame.
This was resulting in their performance lowering dramatically after some loading transitions, as a frame signal would be consumed and presentation would be one frame behind.
It's possible this might have eventually caused deadlocks in these games or others, if it happened twice.
* spl: Implement IGeneralInterface GetConfig
This PR implement the GetConfig call of the spl service. This is currently needed for some homebrews which currently needs Ignore Missing Service to boot. Now it's fixed.
Implementation was done using Atmosphère code and REing too.
* Addresses gdkchan feedback
This PR stubs and implements some clkrst call because they are used to overclock the Switch hardware and it's pointless in our case as we emulate the system.
Everything was done checked by RE.
Fixes#2686
This PR stubs some irs service calls which are needed to get some games playable or at least bootable since we don't support IR data throught real JoyCon for now.
- Stubs `IIrSensorServer` `StopImageProcessor`, `RunMomentProcessor`, `RunClusteringProcessor`, `RunImageTransferProcessor`, `GetImageTransferProcessorState`, `RunTeraPluginProcessor`. All calls are a bit checked by RE.
Closes#2267, #2248, #2126
Night Vision and SpyAlarm are now bootable (but still unplayable due to the lack of the IR data):
* vi: Unify resolutions values and accurate implementation of them.
To continue what was made in #2618, I've REd `vi` service a bit. Now values and checks related to displays are more accurate.
- `am` GetDefaultDisplayResolution / GetDefaultDisplayResolutionChangeEvent have more informations on what the service does.
- `vi:u/vi:m/vi:s` GetDisplayService are now accurate.
- `IApplicationDisplay` GetRelayService, GetSystemDisplayService, GetManagerDisplayService, GetIndirectDisplayTransactionService, ListDisplays, OpenDisplay, OpenDefaultDisplay, CloseDisplay, GetDisplayResolution are now properly implemented.
- Some other calls are cleaned or have extra checks accordingly to RE.
Additionnaly, `IFriendService` have some wrong aligned things, and `pm:info` service placeholder was missing.
* just use _openedDisplayInfo.Remove()
* use context.Memory.Fill()
* fix some casting
* remove unneeded comment
* cleanup
* uses TryAdd
* displayId > ulong
* GetDisplayResolution > ulong
* UL
* hos: Cleanup the project
Since a lot of changes has been done on the HOS project, there are some leftover here and there, or class just used in one service, things at wrong places, and more.
This PR fixes that, additionnally to that, I've realigned some vars because I though it make the code more readable.
* Address gdkchan feedback
* addresses Thog feedback
* Revert ElfSymbol
* hle: Simplify ServiceNotImplementedException
This removes the need to pass in whether the command is a Tipc command or a Hipc command to the exception constructor.
* hle: Use the IPC Message type to determine command type
This allows differentiating between Tipc and Hipc commands when invoking a handler that supports handling both Tipc and Hipc commands.
* First working vibration implementation
* Fix Infinite Rumble in SDL2Mouse
* Stop ignoring one vibValues every 2
* Remove RumbleInfinity as suggested
* Reworked all the vibration handle / calculation
* Revert HidVibrationDevicePosition changes
* Add UI to enable and tune rumble
* Remove some stub logs
* Add PlayerIndex in rumble debug log
* Fix all requested changes
* Implements hid::GetVibrationDeviceInfo
* Better implements HidVibrationValue.Equals/GetHashCode
* Added requested changes from code review
* Last fixes from review
* Update configuration file version for rebase
Update the LibHac dependency to version 0.13.1. This brings a ton of improvements and changes such as:
- Refactor `FsSrv` to match the official refactoring done in FS.
- Change how the `Horizon` and `HorizonClient` classes are handled. Each client created represents a different process with its own process ID and client state.
- Add FS access control to handle permissions for FS service method calls.
- Add FS program registry to keep track of the program ID, location and permissions of each process.
- Add FS program index map info manager to track the program IDs and indexes of multi-application programs.
- Add all FS IPC interfaces.
- Rewrite `Fs.Fsa` code to be more accurate.
- Rewrite a lot of `FsSrv` code to be more accurate.
- Extend directory save data to store `SaveDataExtraData`
- Extend directory save data to lock the save directory to allow only one accessor at a time.
- Improve waiting and retrying when encountering access issues in `LocalFileSystem` and `DirectorySaveDataFileSystem`.
- More `IFileSystemProxy` methods should work now.
- Probably a bunch more stuff.
On the Ryujinx side:
- Forward most `IFileSystemProxy` methods to LibHac.
- Register programs and program index map info when launching an application.
- Remove hacks and workarounds for missing LibHac functionality.
- Recreate missing save data extra data found on emulator startup.
- Create system save data that wasn't indexed correctly on an older LibHac version.
`FsSrv` now enforces access control for each process. When a process tries to open a save data file system, FS reads the save's extra data to determine who the save owner is and if the caller has permission to open the save data. Previously-created save data did not have extra data created when the save was created.
With access control checks in place, this means that processes with no permissions (most games) wouldn't be able to access their own save data. The extra data can be partially created from data in the save data indexer, which should be enough for access control purposes.
* 3D engine now uses DeviceState too, plus new state modification tracking
* Remove old methods code
* Remove GpuState and friends
* Optimize DeviceState, force inline some functions
* This change was not supposed to go in
* Proper channel initialization
* Optimize state read/write methods even more
* Fix debug build
* Do not dirty state if the write is redundant
* The YControl register should dirty either the viewport or front face state too, to update the host origin
* Avoid redundant vertex buffer updates
* Move state and get rid of the Ryujinx.Graphics.Gpu.State namespace
* Comments and nits
* Fix rebase
* PR feedback
* Move changed = false to improve codegen
* PR feedback
* Carry RyuJIT a bit more
This PR implement `CreateApplicationAndRequestToStart` call, result code is checked by RE.
Now we can restart a guest program by itself. This is needed by SSBU when you changes the game language.
NOTE: This currently don't works using OpenAL backend due to another issue.
Closes#2108
For a strange reason `IPInterfaceProperties.IsDynamicDnsEnabled` returns a `PlatformNotSupported` exception in Linux.
This PR fixes this issue with a `try/catch` and set the value to false. Closes#2415.
