This is done by:
1) Implementing said protocol in a new controller input class CemuHookUDPServer.
2) Adding functionality in the WiimoteEmu class for pushing that motion input to the emulated Wiimote and MotionPlus.
3) Suitably modifying the UI for configuring an Emulated Wii Remote.
This resolves a race condition when spamming Refresh button,
which would often end up with duplicates game entries for the entire
duration of the session.
These were marked as translatable in DolphinWX but not DolphinQt,
yet both DolphinWX and DolphinQt tried to fetch translations for them.
This meant that translations worked in both DolphinWX and DolphinQt
back when DolphinWX existed, but that translations stopped working
in DolphinQt once DolphinWX was removed (because the removal of
DolphinWX triggered the removal of the strings from the .po files).
The case body is empty because VolumeVerifier doesn't actually report
problems with severity of None.
Fixes "warning: enumeration value ‘None’ not handled in switch [-Wswitch]"
warning reported by gcc.
This feature was originally exclusive to the previous iteration of
DolphinQt (the one that was the reason for the current iteration
being named DolphinQt2 initially).
https://bugs.dolphin-emu.org/issues/8949
Messages buffer is intended to be of a fixed capacity (MAX_LOG_LINES),
which cannot be achieved by std::queue unless we manually pop() extra elements.
std::queue uses std::deque internally which most likely results in allocations performed continuously.
FixedSizeQueue keeps a single buffer during its entire lifetime, avoiding any allocations except the ones
performed by stored objects.
QTextEdit is heavy, similar in functionality to WordPad,
while QPlainTextEdit is lightweight like Notepad.
Qt documentation recommends using QPlainTextEdit for log viewers,
and it also allows to set automatic cutoff of oldest messages beyond a fixed point,
which we now set to MAX_LOG_LINES (5000)
With the SI poll line count fixed, pretty much all games are polling
twice per frame anyways, making this option superfluous. Since it's a
bit of a gross hack and makes DTMs incompatible with console, let's
just bin it.
Play can only be used when a game is selected and emulation is not
running. Start can be used when a game is selected (to start from
cold boot) or when emulation is running (to start from a savestate).
https://bugs.dolphin-emu.org/issues/11826
This new setting is like Override Language on NTSC Games, except
instead of only applying to the GameCube language setting,
it also applies to the Wii language setting.
Fixes https://bugs.dolphin-emu.org/issues/11299
Makes it a little more explicit which dialog outcomes we're expecting.
While we're at it, we can invert them into guard clauses to unindent
code a little bit.
Avoids propagating headers into scopes where they're not necessary.
Also uncovered reliance on an indirect inclusion within
CheatsManager.cpp, which is now fixed.
If a user indicates that they want to clone and edit an AR code, then
click cancel on the following dialog, we shouldn't actually clone the
code.
We also shouldn't resave the codes if the edit dialog is opened and then
closed again via cancel, as there's nothing that actually changed. This
way we don't perform disk accesses unless they're actually necessary.
Previously, the constructor of GameConfigEdit wasn't doing anything with
the passed in parent pointer. This is dangerous because it can result in
memory being leaked in certain scenarios. It can also affect layout
decisions made by the parent. Instead, pass it through to the base class.
Current usages of the class pass in nullptr as the parent, so this is a
safe change to make with regards to the class hierarchy.
While we're at it, we can std::move the passed in QString into the class
member, allowing calling code to move strings into the constructor,
avoiding copies.
QStringLiterals generate a buffer so that during runtime there's very
little cost to constructing a QString. However, this also means that
duplicated strings cannot be optimized out into a single entry that gets
referenced everywhere, taking up space in the binary.
Rather than use QStringLiteral(""), we can just use QString{} (the
default constructor) to signify the empty string. This gets rid of an
unnecessary string buffer from being created, saving a tiny bit of
space.
While we're at it, we can just use the character overloads of particular
functions when they're available instead of using a QString overload.
The characters in this case are Latin-1 to begin with, so we can just
specify the characters as QLatin1Char instances to use those overloads.
These will automatically convert to QChar if needed, so this is safe.
AddMessage() by itself doesn't perform string formatting facilities, so
this message was actually using the EFB scale as a duration value, not a
format argument. This corrects that.
...in addition to the existing function CreateVolume
(renamed from CreateVolumeFromFilename).
Lets code easily add constraints such as not letting the user
select a WAD file when using the disc changing functionality.
At its only usage point, its return value is stored into a u32, and the
default implementation returns 0xFFFFFFFF (-1), which would be an
unsigned integer. Given all of the bits are used to determine a color,
it makes slightly more sense to treat this as an unsigned value as
opposed to a signed one.
We were doing quite a bit of unnecessary work within CMake to handle and
make sure the necessary libraries were copied over. That approach has
several downsides:
1. It's not possible to handle multi-configuration generators (like
Visual Studio) in an easy manner. The existing script would fail to
copy over the necessary libraries if one configuration was built, and
then another one was built.
2. If you have Qt already installed (properly) by the official binary,
the existing script would copy *all* dlls even if they weren't
necessary. This is pretty bad, since it can waste quite a bit of
space.
Instead, we can just delegate off to the official deployment application
bundled with Qt's libraries that determines what the necessary libraries
are and copies them over as necessary. This also means we can properly
support both release and debug binaries in the same directory, like how
the old handcrafted Visual Studio project files allowed.
Its sufficient to simply specify a debug postfix instead of using an
separate variable. What's nice about this approach is that it will
actually work :p
Previously the code wouldn't work for multi-configuration generators
like Visual Studio.
Currently, it is possible for the DiscordHandler thread to be in the
middle of sleeping when Dolphin is closing. This results in a very
noticeable delay of up to 2 seconds that is unacceptable, especially
for people who don't use the Discord integration.
This fixes the issue by making the thread wait on an Event instead
and signalling it when shutting down.
It already is disabled for other backends, but this didn't happen with the software renderer. Attempting to change it while running causes the change to visually happen (including switching to the normal render settings UI instead of the barren one for the software renderer), but doesn't actually change the backend itself (it'll still use the software renderer at the next launch).
Avoids dragging in IniFile, EXI device and SI device headers in this header which is
quite widely used throughout the codebase.
This also uncovered a few cases where indirect inclusions were being
relied upon, which this also fixes.
Since C++17, non-member std::size() is present in the standard library
which also operates on regular C arrays. Given that, we can just replace
usages of ArraySize with that where applicable.
In many cases, we can just change the actual C array ArraySize() was
called on into a std::array and just use its .size() member function
instead.
In some other cases, we can collapse the loops they were used in, into a
ranged-for loop, eliminating the need for en explicit bounds query.
This changes the Host Input Authority and Golf Mode checkboxes into a
set of radio buttons, consisting of Fair Input Delay, Host Input
Authority, and Golf Mode. This represents the 3 network modes we have.
Although Golf Mode is just an extension of Host Input Authority, it's
more logical to the user to present it as a separate option, rather
than enabling the Golf Mode checkbox only when Host Input Authority is
enabled. This also eliminates the need to first enable Host Input
Authority before Golf Mode can be enabled.
This also adds tooltips to provide brief descriptions of the options,
as well as reintroducing tooltips that were previously removed.
If opening the adapter fails, report the libusb error message in the GUI
instead of “No Adapter Detected”.
The error condition is removed when the adapter is unplugged.
The previous implementation of cheat search would reconvert the input
string for every single memory value. Now we do it once and construct
a comparison lambda which we pass to the search code.
In addition, I also added input validation. So, for example, if you've
selected Decimal input and you try to compare against "FF",
it won't search and will instead let the user know they've entered an
invalid value. Similar logic for if you enter "1.2" in a search for
bytes. Before, it would just use 0 if it failed to convert the value.
Changed itemSelectionChanged and itemClicked signal to itemPressed in CodeWidget.
Holding mouse down and moving will only travel up/down the stack one time.
This fixes the common occurrence of unintentionally traveling deeper down the stack or higher up the callstack than intended.
This allows us to update the rich presence description if a channel
is launched from the Wii Menu. It also handles other PPC title
launches, e.g. Smash Bros. Masterpieces.
Host.h: Added Host_TitleChanged().
DolphinNoGUI/MainNoGUI.cpp: Implemented Host_TitleChanged().
DolphinQt/Host.cpp: Implemented Host_TitleChanged().
Android/jni/MainAndroid.cpp: Stubbed Host_TitleChanged().
DSPTool/StubHost.cpp: Stubbed Host_TitleChanged().
UnitTests/StubHost.cpp: Stubbed Host_TitleChanged().
This adds the center to the calibration menu when it is nonzero.
It also refactors CENTER_COLOR to be a function, similar to other colors
after an earlier commit.
This is useful in far out-of-calibration controllers, such as the
Switch Pro controller. This also adds support for configuring the center
in the Mapping widget.
* Use font based sizing for row height. Fits more rows on screen.
* Adds whitespace for better formatting and minimum column width.
Helps prevent frequent resizing while scrolling.
