Center DX9 window
Bring Wiimote reconnect confirm dialog to topmost, now only works with OpenGL.
(It seems DX9 in full screen doesn't like other windows overlapped upon it.)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4895 8ced0084-cf51-0410-be5f-012b33b47a6e
in opengl correct an error introduced by mi in efb to ram alignment, it's seems to fix SMS but it missalign a lot of other games, so revert to the default. must solve truncated coins in NSMB.
revert alpha testing values to the values in rev 4812 as they fix some games.
in d3d dynamized the Render target size so it will change at runtime when viewport exceed it size, in the worse case it will cause a missing frame when resizing but in the games I tested is not noticeable at all
This must solve all the remaining viewports problems in nvidia cards, in ati this is not needed.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4888 8ced0084-cf51-0410-be5f-012b33b47a6e
Please ignore previous revision, which is a proof of why late-night coding isn't always a good idea...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4853 8ced0084-cf51-0410-be5f-012b33b47a6e
More precisely, if you booted a game before opening the config panel, they'd all go to the default values...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4852 8ced0084-cf51-0410-be5f-012b33b47a6e
in videocommon little fix for the alpha test values, return to the original values as they are more accurate.
in D3D:
huge change in state management, now all the state management is centralized and redundant state changes are eliminated.
Fixed the overlapped viewport error in non ati cards:
the error was caused by this: when a viewport is defined larger than the current rendertarget, an error is thrown and the last valid viewport is used, this is the reference behavior, in ati cards if a larger viewport is defined, no eror is returned, the rendering is valid and is rendered using the projection defined by the viewport but limited to the rendertarget are, exactly like opengl or the GC hardware.
to solve this in reference drivers defined a large rendertarget (2x the size of the original) and proceed to render in a centered quad insithe the larger rendertarget, in this way larger viewports always falls inside a valid rendertarget size, the drawback of this is the waste of resources. it can be dynamized, depending or games or changed at runtime when a oversized viewport is detected, but i live that to future commits.
please test this and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4841 8ced0084-cf51-0410-be5f-012b33b47a6e
Goal is complete/near complete RE of DSP_UC_6A696CE7 (GC AX), and hopefully ROM.
From there, seeing the additional changes in other GC AX versions (there are only 4 others, with minor differences), should be "simple".
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4818 8ced0084-cf51-0410-be5f-012b33b47a6e
Also fixed the crash when clicking OK while having one WiiMote active.
Nunchuck's gravity is kinda wrong, don't know why though, We don't know if it's Wiiuse's fault or if the nunchuk has different vars...
Punchout @ingame the nunchuk gravity also doesn't work...
All the work done by sanchez!
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4794 8ced0084-cf51-0410-be5f-012b33b47a6e
Now the frame limiter yields on CPU thread, not as before on GPU thread mistakenly
2. Fixed clear of VI interrupts
I guess VI interrupts are not used at all, because they were never cleared before
3. Made GPU thread 0% processor usage when paused whatever your active config is.
I tried the event approach but somehow the thread resume latency is excessively long (Who can tell me why?)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4790 8ced0084-cf51-0410-be5f-012b33b47a6e
All you gotta do is Pause the emulation! That's useful for when your batteries run out during gameplay, for example...
But if you change the WiiMote source (between Emulated, Real or Inactive) you must disconnect and reconnect (Menu Tools -> Connect WiiMote) the WiiMotes affected by the change...
Thanks to jack.fr0st who did all the emulation state notification work!
Now every plugin has a way to know the current emulation state (paused, stopped or playing)
@ayuanx: I thought about doing a PostMessage(g_WiimoteInitialize.hWnd, WM_USER, WIIMOTE_DISCONNECT, current_number); so that the user gets asked to reconnect that WiiMote, trying to avoid having to disconnect and reconnect, but it didn't work because shooting that message only asks to reconnect, doesn't do a disconnect... Do you have any ideas on how to accomplish that?
Also, if anyone could check if Issue 1916 is finally fixed... Or at least when is the cursor being hidden or not...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4789 8ced0084-cf51-0410-be5f-012b33b47a6e
It's really helpful since pairing up using Microsoft's Stack is a real pain!
Thanks to jack.fr0st and sanchez who did most of the work!
Note: IT ONLY WORKS WITH MICROSOFT BLUETOOTH STACK!
Also you should press the Refresh Real WiiMotes button after everything is paired up! (Because it takes a while for the drivers to get installed)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4786 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixed Issue 1917
(Since wxWidgets is not allowed in core, so I moved the popup window to CFrame)
*Maybe* this could also fix Issue 1919?
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4780 8ced0084-cf51-0410-be5f-012b33b47a6e
2. Fixed Issue 1909
Multi-Nunchuck control problem
3. Updated SYSCONF, which should enable games that require MotionPlus, such as "Wii Sports Resort"
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4773 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixes a crash when the slot selected to use Real WiiMote is greater than the number of Reall WiiMotes connected...
For example: We have 1 Real WiiMote connected, and the user selects the 4th WiiMote as Real WiiMote...
Also Let's you choose between Inactive and Emulated when the game is running... But you must disconnect and connect the wiimote for the emulated to start working (Via Menu -> Tools -> Connect)
I'm trying to figure out a way of allowing change to Real WiiMote while the game is running... It can be done when the game is paused, but I can't find a way of detecting if the game is paused =\
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4771 8ced0084-cf51-0410-be5f-012b33b47a6e
Unbreak linux stop on Single Core, remove an unnecessary wait event, fix DSP HLE/DSP LLE/OGL plugin hang on stop when the config dialog has been opened (nJoy and Wiimote still need to be fixed), avoid the CpuThread to be stuck in the efb/swap loop by setting a flag before the thread is actually shutdown (contrary to r4756 which was setting it.. after :D)
Clear the status bar Framerate/Core message when the game is stopped.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4769 8ced0084-cf51-0410-be5f-012b33b47a6e
Only downside: You can't change between Real and Emulated WiiMotes while the game is running anymore... This is due to the way the Real WiiMotes are assigned to the slots...
I've tested it with 2 real WiiMotes, but I can't see why it wouldn't work with 4!
Also, you can assign Real or Emulated WiiMotes to any one of the four slots that it will be respected!
Happy New Year everybody!
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4765 8ced0084-cf51-0410-be5f-012b33b47a6e
- It's worth noticing that both in OGL and D3D the Config options for Always and Auto Hide Cursor have no effect. I can't get (read) those values in D3DBase.cpp ...
* Some more key bindings
* Removes duplicate ifdef _Win32 from VKToString
* Made VKToString a little faster (smarter) (but don't expect any speedups though...)
* Corrects Pal60 name in Config (it was Pal6)
I'm still trying to figure out why the Toggle Fullscreen Button doesn't work...
Also I really thought about commiting my changes to Wiimote_real, which are tested and working for 1 real wiimote, but I need someone to test them with more than one real wiimote (I only have one)... See Issue 1876 ...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4757 8ced0084-cf51-0410-be5f-012b33b47a6e
2. Connect/Disconnect Wiimote on the fly, no need to pause game
PS: Toggling full screen by ESC in DX9 doesn't work yet, it will close Dolphin instead at the time.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4754 8ced0084-cf51-0410-be5f-012b33b47a6e
* You can connect/disconnect one or more WiiMote from Menu->Tools any time (must pause game first)
* Up to 4 Emulated Wiimotes can work together at the same timer
(PS: "Wiimote_Real" needs to be rewritten to support Multi-WiiMote, and it could be broken already now)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4736 8ced0084-cf51-0410-be5f-012b33b47a6e
. Performance boost
(Completely non-blocking between Sound thread and CPU thread, in the meantime keeping them thread safe)
. Both 32KHz & 48KHz sound can be handled properly now
(But up-sampling is still not implemented, and I don't think any game requires it.)
. Strategy adjustment
When your PC is *NOT* capable to run the game at 100%:
>> DSound Could yield more fluent sound than OpenAL sometimes, but you will lose the sync between video & audio (since audio is played before video to guarantee fluency)
>> OpenAL Ensures video & audio are always sync'ed, but sound could be intermittent(to let slow video catch up)
. Changed default frame limit to: Auto
(Somehow this can dramatically decrease the chance of wiimote desync in game NSMB)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4724 8ced0084-cf51-0410-be5f-012b33b47a6e
. Fixed Sample Rate for DSP
(Now if your CPU is capable to run game at 100%, you will get pure sound without buzz or static noise)
. Fixed Sample Rate for AI
(Now if your CPU is capable to run game at 100%, you will get sync'ed video and audio)
. Fixed Backend list for DSPLLE
. Improved Aduio DMA a bit
(There might be a completely redesign in following phases)
WARNING: The whole rework will take time to complete.
This commit is compilable, but could be unstable.
So you can try it and test it but don't take it as a release rev!
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4717 8ced0084-cf51-0410-be5f-012b33b47a6e
- Add an option to enable the EFB scaled copy *TODO find a better place for it to go.
SOIL - Update stb_image to the latest version (1.16 to 1.18)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4716 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixed issue: XInput trigger source cannot be selected
Added proper close of SDL_Joystick
But still nJoy and Wiimote cannot share the same gamepad. It needs to be figured out how to do it with SDL.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4686 8ced0084-cf51-0410-be5f-012b33b47a6e
changed the blending functions for the logic ops emulation, now the accuracy is the best possible with the functions available in D3D.
if someone is interested i'll post how i get this values :) please test and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4673 8ced0084-cf51-0410-be5f-012b33b47a6e
in D3D and Opengl:
fixed one nasty bug in texture loading where if a dynamic texture keeps his format but the tlut format is changed, the try or reloading the texture in the same texture could cause a hang if the size of the resulting texture is different than the original (size in bytes)
Applied a ugly temporal hack to the texture conversor to solve efb to ram misalignments and effect distortions.
in D3D:
Pseudo implementation of logic ops using basic blending: the first 8 operations are "good approximations", the remaining 8 are bullshit :) if someone have a better approximation to emulate this logic please let me know.
please test if i don't break anything in the process and test Mario kart wee you will get a nice surprise.:)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4656 8ced0084-cf51-0410-be5f-012b33b47a6e
2. Change the frequency of WiiMote report sending to 100Hz which complies with real Wiimote hardware.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4655 8ced0084-cf51-0410-be5f-012b33b47a6e
2) Commented out "SendEventNumberOfCompletedPackets()", I intend to have wider tests on this, if **this revision** causes frequent wiimote de-sync, please report.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4647 8ced0084-cf51-0410-be5f-012b33b47a6e
This enables you to use knife on a keyboard instead of an analog stick in games of "Resident Evil: Umbrella Chronicles" and "Resident Evil: Darkside Chronicles".
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4642 8ced0084-cf51-0410-be5f-012b33b47a6e
How to: First bind Roll & Pitch to "Analog 1" or "Analog 2", then set Roll Degree and Pitch Degree both to: "Free Swing".
Now in games, you can swing your emulated wiimote to Up/Down/Left/Right by simply pushing your binding analog stick to Up/Down/Left/Right.
PS:The swing direction will automatically adjust itself when "Upright Wiimote" option is checked.
Now you can play "Mad World" with emulated wiimote. :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4641 8ced0084-cf51-0410-be5f-012b33b47a6e
opengl: a little code cleanup and possible speedup in texture recreation.
d3d and opengl :plugins corrected the efb alignment when efb to ram is used.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4637 8ced0084-cf51-0410-be5f-012b33b47a6e
No need to use "Sound Loop Hack", so I just removed it.
2. Fixed the WAD game loading issue. What can I say, I have to go though and patch all the WII_IPC_HLE devices to take care of this.
3. Applied tomman's Linux keyboard patch, but I can't test here, no suitable environment.
4. Disabled configuration dialogs when game is running, you have to pause game first to be able to change any configuration. (Which prevents some accidental crash to happen.)
5. Other trivial fixes, no need to mention.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4632 8ced0084-cf51-0410-be5f-012b33b47a6e
So just updated the keyboard "shake" function a bit, this can dramatically increase the shake key sensitivity.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4625 8ced0084-cf51-0410-be5f-012b33b47a6e
Just press the "Shake" key.
The shake involves all the three axes: X, Y, Z.
So when you press the shake key, you are actually shaking not only up-down, left-right, and forward-backward at the same time.
I did this becuse different games may require different directional shake, no need to seperate them to 3 keys I think.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4624 8ced0084-cf51-0410-be5f-012b33b47a6e
I know hack is not good but before we find a better way to detect different games, at least this option allows some games to output normal sound without breaking other games.
Besides, this commit will hopefully fix the "Unknown device: /dev/usb/hid" issue, but not sure as I have no game to test on this issue.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4623 8ced0084-cf51-0410-be5f-012b33b47a6e
D3D: add the EFB Copy option to complete Rodolfo's commit plus add the Overlay FPS and the Disable Fog options
also change the config dialog's behaviour a bit
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4622 8ced0084-cf51-0410-be5f-012b33b47a6e
Now efb to ram display correctly but still is misaligned by one pixel
please test and give me feedback
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4618 8ced0084-cf51-0410-be5f-012b33b47a6e
This commit fixed the Hang-up in many games, like "New Super Mario Bros. Wii", "Resident Evil: The Darkside Chronicles", "Fatal Frame 4: Tsukihami no Kamen", "Muramasa: The Demon Blade", and etc. You name it. OH YEAH!
This little issue really cost me some *serious* debugging time, phew...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4616 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixed more memory leaks when doing state load. Now all file devices(handles) are stored in state, and this will fix some crash after loading state.
Warning: Do NOT Save/Load state before game title is shown and controllable, or else you will get a corrupt state.
If you encounter "Emu WiiMote Desync" frequently, please report the condition
(PS: To recover from wiimote desync, just load a saved state)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4608 8ced0084-cf51-0410-be5f-012b33b47a6e
Also reimplemented screen clearing as a color quad to support alpha blending when clearing as in the original hardware.
the funny thing is how is implemented peeking, as locking depth textures is not supported, implemented peeking copying the values form the depth texture to a r32f render target and then reading back the data.
please a lot of testing to this commit.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4599 8ced0084-cf51-0410-be5f-012b33b47a6e
first part if fixing, fixed, i thing, the flickering that everyone has reported, at least in my case i only have flickering in the one texture in one game and now is fixed. The other fix is not for an reported issue, is more a correctness fix, running dolphin with pix to review debug errors, result in a ton of warnings and error, now with this commit, at least for ati, there no more error or warnings, this means, correct management and state change, no accurate emulation, for this still a lot of work to do.
for this part of the commit please give me feedback and let me know of remaining issues
Te second part is the partial implementation of efb to ram copy in d3d, this won't brake anything because is commented but i commit this to ask for help from ector and donko in some errors remaining in the implementation related to differences between opengl an d3d.
if you want to test this you have to uncomment line 150 to 155 of bpstruct.cpp
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4594 8ced0084-cf51-0410-be5f-012b33b47a6e
- Adjustable partial press for the main stick, C-stick, and triggers
(separate keys + adjustable values for semi-L, semi-R, semi-main, semi-C)
- Escape key to clear a keybinding (especially useful now)
- A whole bunch of cleanuppy/consistency stuff.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4572 8ced0084-cf51-0410-be5f-012b33b47a6e
D3D: fix the wireframe option getting enabled when using the fullscreen option
and did some code cleanup
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4555 8ced0084-cf51-0410-be5f-012b33b47a6e
1. Added LiveUpdates, while the configuration window is open nJoy and Wiimote will check for connected/disconnected pads
2. Removed the 'Nintendo RVL-CNT-01' device from the device list, and other SDL devices with no axes/buttons
3. Added SDL (from the current SVN) to get debugging information for SDL.dll
4. Added 'Upright Wiimote' option to emulated Wiimote options
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4534 8ced0084-cf51-0410-be5f-012b33b47a6e
corrected a little depth textures still broken but now at least i discover the reason, the ultra bad news for d3d lover is, the only correct way to implement depth textures will be do a firs depth only pass disabling blending.
This is because blending is affecting the values stored in the depth texture, so to store the true values, blending mus be deactivated.
this will degrade performance but is the only "Correct" way in d3d 9. the other possibility is dx10 but that's a complete different story ;)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4526 8ced0084-cf51-0410-be5f-012b33b47a6e
Implemented all the correct format conversions in efb to texture copy.
replaced all the stretcrect calls with quad draws this must improve speed a bit.
A BIGGGGGGGGGG cleanup in the code and reorganization.
reimplemented zpeek using a secondary render target ( this still is buggy so many issues left)
please a lot off feedback.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4520 8ced0084-cf51-0410-be5f-012b33b47a6e
in direct3d this is different, the only valid values are between 0.0 an 1.0 so fix this and let the shader handle the rest.
please test all this and let me know the results.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4494 8ced0084-cf51-0410-be5f-012b33b47a6e
This is a test, clamp the values to see if this fix the problem, please test a lot don't know if this breaks something else
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4491 8ced0084-cf51-0410-be5f-012b33b47a6e
* clear and flicker problem in d3d, backbuffer clearing was commented out, (if this was on right let me know and I'll revert).
* alpha problem introduced by my modifications to the tev, must been sleeping when i wrote that code, should be fixed now.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4471 8ced0084-cf51-0410-be5f-012b33b47a6e
please test specially in paper mario and Killer 7 that where games where supposedly this was used.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4470 8ced0084-cf51-0410-be5f-012b33b47a6e
thanks a lot to chaoscode he make possible to test this on nvidia. please test this a lot and give me feedback :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4468 8ced0084-cf51-0410-be5f-012b33b47a6e
d3d: remove the depth texture path it will not work so for now only lockable textures were available. i thing the only way will be a use a secondary render target and do a depth pass to mimic depth textures.
opengl: minor cleanup here and there and a possible fix to issue 1509, but not tested because in my system the errors remarked in the issue don't show.
commond: code reorganization an optimization in the pixel shader generator, trying to understand the tev stages, make some changes to make the generator faster (not much only started for the alpha test and fog).
this changes try start solving the diferences bethen the hardware plugins and the soft plugin.
i hope with i don't brake nothing but please test this a lot.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4465 8ced0084-cf51-0410-be5f-012b33b47a6e
Code cleanup in nJoy i had around for a while, it also adds code to support SDL 1.3's force feedback API and is more stable (will not crash anymore on stop when rumble is enabled)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4459 8ced0084-cf51-0410-be5f-012b33b47a6e
they are extremely hard/driver Dependant so your test is needed.
there plugin will automatically select the path thats work for your hard, need that everyone post the messages that the video init throw (yes all will hate me for the messages) but is the only way to see what is the optimal path. in the next commit will clean the unused paths.
i'm afraid thath the second path is Vista dependant (you need to include vista sdk to make it work).
the third path use lockable depth buffer so there is no change in that.
now peek color is fully working and is fast because the you never lock the the real color texture only the offscreen surface.
please if someone knows a game that use peek color please test it.
also fixed blending so SMS underwater must be fixed.
this work with d3d teach me that i love opengl :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4393 8ced0084-cf51-0410-be5f-012b33b47a6e
Add support for button combos that are built-in to controllers:
y+x+start for three seconds updates the origin
b+x+start for three seconds resets
Changed CPeripheralInterface to a namespace and renamed to ProcessorInterface
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4366 8ced0084-cf51-0410-be5f-012b33b47a6e
implemented buffer format fall back to allow hardware that don't support lockable formats to run the games with Z peeking disabled, applied as well the patch suggested in issue 1494 please give heavy test to this commit
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@4365 8ced0084-cf51-0410-be5f-012b33b47a6e
