Avoids the use of the null pointer to represent an empty string.
Instead, we can simply pass an empty string_view instance. Using
std::string_view enforces this invariant at the API level.
Due to the lack of cast here, this will actually print out the ascii
value, rather than the character itself, due to promoting to integral
values. Instead, we can eliminate the use of character operands and just
print the value itself directly, given it's equivalent behavior with
less code.
Allows these arrays to be placed within the read-only segment (and
enforces the immutability in the code itself). While we're at it, we can
make use of std::array here.
Now that the std::map less-than comparitor is capable of being used with
heterogenous lookup, we're able to convert many of the querying
functions that took std::string references over to std::string_view.
Now these functions may be used without potentially allocating a
std::string instance unnecessarily.
Previously, when performing find() operations or indexing operations on
the section map, it would need to operate on a std::string key.
This means cases like:
map.find(some_string_view)
aren't usable, which kind of sucks, especially given for most cases, we
use regular string literals to perform operations in calling code.
However, since C++14, it's possible to use heterogenous lookup to avoid
needing to construct exact key types. In otherwords, we can perform the
above or use string literals without constructing a std::string instance
around them implicitly.
We simply need to specify a member type within our comparison struct
named is_transparent, to allow std::map to perform automatic type
deduction.
We also slightly alter the algorithm to an equivalent compatible with
std::string_view (which need not be null-terminated), as strcasecmp
requires null-terminated strings.
While we're at it, we can also provide a helper function to the struct
for comparing string equality rather than only less than. This allows
removing other usages of strcasecmp in other functions, allowing for the
transition of them to std::string_view.
fmt diverges from printf in that '.' as a precision specifier may only
be used for floating-point values (makes sense, given it's indicating
precision after the decimal point).
Begins the transition to using fmt for string formatting where
applicable. Given fmt supports formatting std::string instances out of
the box, we can remove now-unnecessary calls to .c_str() and .data().
Note that this change does not touch the actual logging subsystem aside
from converting the final StringFromFormat call in the process over to
fmt::format. Given our logging system is heavily used throughout the
entire codebase, and converting that over will be quite a large change
by itself, this will be tackled near the end of the conversion process.
Avoids dragging in IniFile, EXI device and SI device headers in this header which is
quite widely used throughout the codebase.
This also uncovered a few cases where indirect inclusions were being
relied upon, which this also fixes.
Allows for both string types to be non-allocating. We can't remove the
const char* overload in this case due to the fact that pointers can
implicitly convert to bool, so if we removed the overload all const
char arrays passed in would begin executing the bool overload instead of
the string_view overload, which is definitely not what we want to occur.
Since C++17, non-member std::size() is present in the standard library
which also operates on regular C arrays. Given that, we can just replace
usages of ArraySize with that where applicable.
In many cases, we can just change the actual C array ArraySize() was
called on into a std::array and just use its .size() member function
instead.
In some other cases, we can collapse the loops they were used in, into a
ranged-for loop, eliminating the need for en explicit bounds query.
Prior to this commit, the emitter would emit a 7-byte instruction when
loading a 32-bit immediate to a 64-bit register.
0: 48 c7 c0 ff ff ff 7f mov rax,0x7fffffff
With this change, it will check if it can instead emit a load to a
32-bit register, which takes only 5 or 6 bytes.
0: b8 ff ff ff 7f mov eax,0x7fffffff
std::call_once is guaranteed to execute the given callable object
exactly once. This guarantee holds even if the function is called
concurrently from several threads.
Given that, we can replace the mutex and boolean flag with
std::call_once and a std::once_flag to perform the same behavior.
Previously, every entry pair within the map would be copied. The reason
for this is subtle.
A std::map's internal entry type is defined as:
std::pair<const Key, Value>
but the loop was declaring it as:
std::pair<Key, Value>
These two types aren't synonymous with one another and so the compiler
is required to always perform a copy.
Using structured bindings avoids this (as would plain auto or correcting
the explicit type), while also allowing the use of more appropriate
names compared to first and second.
std::function is allowed to heap allocate in order to hold any necessary
bound data in order to execute properly (e.g. lambdas with captures), so
this avoids unnecessary reallocating.
While current usages of ParseLine aren't problematic, this is still a
public function that can be used for other purposes. Essentially makes
the function handle potential external inputs a little nicer.
We can just utilize map's insert_or_assign() function and check the
return value to determine whether or not we need to insert the key into
the keys_order vector.
All supported platforms now have easy access to a compiler with C++17
support.
C++17 potentially allows for some nice cleanups and removes the need
for standard library backports (optional/variant).
See discussion at https://dolp.in/pr6264#discussion_r158134178
Different address spaces can be chosen in the memory view panel.
* Effective (or virtual): Probably the view people mostly want. Address
translation goes through MMU.
* Auxiliary: ARAM address space. Does not display anything in Wii mode.
* Physical: Physical address space. Only supports mem1 and mem2 (wii
mode) so far.
MemoryWatcher only works on Linux and affects emulation determinism due
to scheduling additional events, which causes NetPlay to desync.
Considering that this interface is a rather specialized use case, the
communication with it is kinda crappy *and* it's affecting emulation, I
think it's best to just axe it and come up with a better implementation
of the functionality.
* The high half of regOp is immediately overwritten so the value in it is irrelevant.
* MOVSD produces an unnecessary dependency on the high half of regOp.
* MOVAPS is implemented as a register rename on modern microarchitectures.
There is no reason to use MOVAPD over MOVAPS, for two reasons:
* There has never been a microarchitecture with separate single and double domains.
* MOVAPD is one byte longer than MOVAPS
This sends arbitrary packets in chunks to be reassembled at the other
end, allowing large data transfers to be speed-limited and interleaved
with other packets being sent. It also enables tracking the progress of
large data transfers.
Switch to using additional overloads of sf::Packet, so we can eliminate
some of the messy code and just use the normal syntax for
BigEndianValue.
We can't avoid helper functions with u64 due to SFML's non-standard way
of defining 64-bit integer types.
Prior to this commit, the emitter would unconditionally emit a 10-byte
instruction known as MOVABS when loading a 64-bit immediate to a
register.
0: 48 b8 ef be ad de 00 movabs rax,0xdeadbeef
7: 00 00 00
With this change, it will instead rely on the fact that on x64 writes to
32-bit registers are automatically zero extended to 64-bits, allowing
us to emit a 5 or 6-bytes instruction with the same effect for certain
immediates.
0: b8 ef be ad de mov eax,0xdeadbeef
Prior to this commit, the emitter would unconditionally emit a 10-byte
instruction known as MOVABS when loading a 64-bit immediate to a
register.
0: 48 b8 ef be ad de ff movabs rax,0xffffffffdeadbeef
7: ff ff ff
With this change, it will instead emit a 7-byte instruction when it is
possible to express the 64-bit immediate using a signed 32-bit value.
0: 48 c7 c0 ef be ad de mov rax,0xffffffffdeadbeef
The LogManager code had trouble detecting the "/Source/Core/" substring
for two reasons, neither of which seemed to happen a few years ago:
1. __FILE__ is in lowercase on MSVC
2. __FILE__ uses backslash as the directory separator on MSVC
Fixes https://bugs.dolphin-emu.org/issues/11366
Similar in nature to e28d063539 in which
this same change was applied to the x64 emitter.
There's no real requirement to make this const, and this should also
be decided by the calling code, considering we had places that would
simply cast away the const and carry on
Added an option in General config to enable/disable usage statistics. Added a popup on first open if
the user would like to engage in reporting. Clicking cancel or out of the box opts out. Only
clicking 'Ok' will enable reporting. Also added a new android specific values to report.
Type punning like this is undefined behavior. Instead, we use std::memcpy to
copy the necessary data over, which is well defined (as it treats both
the source and destination as unsigned char).
This adds the functionality of sending the host's save data (raw memory
cards, as well as GCI files and Wii saves with a matching GameID) to
all other clients. The data is compressed using LZO1X to greatly reduce
its size while keeping compression/decompression fast. Save
synchronization is enabled by default, and toggleable with a checkbox
in the NetPlay dialog.
On clicking start, if the option is enabled, game boot will be delayed
until all players have received the save data sent by the host. If any
player fails to receive it properly, boot will be cancelled to prevent
desyncs.
Previously these were required to be built into the executable so that
the JIT portion of the DSP code would build properly, as the
x86-64-specifics were tightly coupled to the DSP common code. As this is
no longer the case, this is no longer necessary.
Makes the enum values strongly-typed and prevents the identifiers from
polluting the PowerPC namespace. This also cleans up the parameters of
some functions where we were accepting an ambiguous int type and
expecting the correct values to be passed in.
Now those parameters accept a PowerPC::CPUCore type only, making it
immediately obvious which values should be passed in. It also turns out
we were storing these core types into other structures as plain ints,
which have also been corrected.
As this type is used directly with the configuration code, we need to
provide our own overloaded insertion (<<) and extraction (>>) operators
in order to make it compatible with it. These are fairly trivial to
implement, so there's no issue here.
A minor adjustment to TryParse() was required, as our generic function
was doing the following:
N tmp = 0;
which is problematic, as custom types may not be able to have that
assignment performed (e.g. strongly-typed enums), so we change this to:
N tmp;
which is sufficient, as the value is attempted to be initialized
immediately under that statement.
In cases where we just want a random value for a primitive arithmetic
type, we can wrap this in a template to allow convenient direct
assignment instead of keeping declaration and initialization separate
(making it more difficult to use values uninitialized). This also allows
the use of Common::Random with functions such as std::generate, making
it more flexible in how random values can be generated.
ChunkFile doesn't use any of the file utilities, so we can drop these
headers to avoid pulling in unnecessary dependencies. This also
uncovered a few indirect inclusions.
The required version of MSVC already supports [[maybe_unused]], so we
can utilize this here. When GCC 7 and clang 3.9 become hard
requirements, we can eliminate this macro entirely and replace it with
[[maybe_unused]].
UNUSED is quite a generic macro name and has potential to clash with
other libraries, so rename it to DOLPHIN_UNUSED to prevent that, as well
as make its naming consistent with the force inline macro
This is much better as prefixed double underscores are reserved for the
implementation when it comes to identifiers. Another reason its better,
is that, on Windows, where __forceinline is a compiler built-in, with
the previous define, header inclusion software that detects unnecessary
includes will erroneously flag usages of Compiler.h as unnecessary
(despite being necessary on other platforms). So we define a macro
that's used by Windows and other platforms to ensure this doesn't
happen.
Instead of globbing things under an ambiguous Common.h header, move
compiler-specifics over to Compiler.h. This gives us a dedicated home
for anything related to compilers that we want to make functional across
all compilers that we support.
This moves us a little closer to eliminating Common.h entirely.
This makes it easier to generate random numbers or fill a buffer with
random data in a cryptographically secure way.
This also replaces existing usages of RNG functions in the codebase:
* <random> is pretty hard to use correctly, and std::random_device does
not give enough guarantees about its results (it's
implementation-defined, non cryptographically secure and could be
deterministic on some platforms).
Doing things correctly is error prone and verbose.
* rand() is terrible and should not be used especially in crypto code.
The definition of the function uses the ordering {mod, reg, rm}, which
is correct. Match the prototype to this, so that the parameter list
isn't misleading.
Gets rid of the need to set up memcpy boilerplate to reinterpret between
floating-point and integers.
While we're at it, also do a minor bit of tidying.
Given this is what occurs in both constructors (as one just passes
through to another), we can just initialize the member directly.
While we're at it, amend the struct to follow the general ordering
convention of:
<new types>
<functions>
<variables>
Given this is actually a part of the Host interface, this should be
placed with it.
While we're at it, turn it into an enum class so that we don't dump its
contained values into the surrounding scope. We can also make
Host_Message take the enum type itself directly instead of taking a
general int value.
After this, it'll be trivial to divide out the rest of Common.h and
remove the header from the repository entirely
This was added in 4bdb4aa0d1 back in
2009-02-27. The only usage spot of this macro involves the same checks
that were used to define that preprocessor macro, so we can simply
remove the macro
Only invoke config changed callbacks from Config::Save, not
Layer::Save. The latter results in callbacks being called
once per layer, up to 7 times per save.
- Move all of the ec functions into the Common::ec namespace.
- Give the public functions better names and some usage information.
- Move all of the "elt" related functions into an "elt" class including
all of the arithmetic operations, so that the logic becomes clearer
and feels less like assembly.
This also makes it much more obvious what the parameters are, instead
of only using unsigned char* (which doesn't tell anything about what
the pointer is used for or the size).
- Similarly, add a new "Point" class and move point functions there.
Overload the arithmetic operators to make calculations easier to read
The loops relied on unsigned integer overflow, which is not immediately
obvious. Replace them with less clever variants that are clearer.
Also implement bn_compare using std::memcmp.
This makes it possible to use enums as the config type.
Default values are now clearer and there's no need for casts
when calling Config::Get/Set anymore.
In order to add support for enums, the common code was updated to
handle enums by using the underlying type when loading/saving settings.
A copy constructor is also provided for conversions from
`ConfigInfo<Enum>` to `ConfigInfo<underlying_type<Enum>>`
so that enum settings can still easily work with code that doesn't care
about the actual enum values (like Graphics{Choice,Radio} in DolphinQt2
which only treat the setting as an integer).
This excludes the second argument from template deduction.
Otherwise, it is required to manually cast the second argument to
the ConfigInfo type (because implicit conversions won't work).
e.g. to set the value for a ConfigInfo<std::string> from a string
literal, you'd need a ugly `std::string("yourstring")`.
GetHandle() should really not even be part of IOFile's interface, but
since it is (for the time being), we can cull unnecessary usages of it.
In this case, the WriteBytes() function does what we need without using
the underlying handle directly.
This allows getting rid of casts. We can also leverage std::min to allow
making relevant variables const. Also make the "empty" table const to
allow it to be read-only.
Converts them from 0 == success, 1 == failure to using the built-in
standard bool. Also while we're at it, const qualify write_sector's
"sector" parameter, since nothing in the function modifies the data
being pointed to.
Also move it to MathUtils where it belongs with the rest of the
power-of-two functions. This gets rid of pollution of the current scope
of any translation unit with b<value> macros that aren't intended to be
used directly.
Change SettingsHandler to take a buffer instead of assuming that the
setting file to read is always on the host filesystem for more
flexibility and make it possible to use the new filesystem interface.
Given bit conversions between types are quite common in emulation
(particularly when it comes to floating-point among other things) it
makes sense to provide a utility function that keeps all the boilerplate
contained; especially considering it makes it harder to accidentally
misuse std::memcpy (such as accidentally transposing arguments, etc).
Another benefit of this function is that it doesn't require separating
declarations from assignments, allowing variables to be declared const.
This makes the scenario of of uninitialized variables being used less
likely to occur.
As of VS 15.7, these seem to have been removed. Given we shouldn't have
been using these for some time, just replace them with the standard
library equivalent.
This fixes building on Windows with VS 15.7
Keeps all of the floating-point utility functions in their own file to
keep them all together. This also provides a place for other
general-purpose floating-point functions to be added in the future,
which will be necessary when improving the flag-setting within the
interpreter.
Since all FS access will go through the new FS interface (PR #6421)
in order to keep track of metadata properly, there is no need to return
absolute paths anymore.
In fact, returning host paths is a roadblock to using the FS interface.
This starts the migration work by adding a way to get paths that are
relative to the Wii NAND instead of always getting absolute paths
on the host FS.
To prepare for future changes, this commit also makes returned paths
canonical by removing the trailing slash when it's unneeded.
Eventually, once everything has been migrated to the new interface,
we can remove the "from" parameter.
