This was causing deadlocks when a game didn't load (including if RetroAchievements does not yet support it) because it was attempting to close the queue the the callback was currently running on, forcing LoadGameCallback to wait for LoadGameCallback to finish. However, it appears that recent changes to the queue have independently resolved the reason CloseGame was being called here in the first place.
Fix the UI hanging for several seconds when opening the Controllers
window.
Move the scan for Bluetooth adapters onto a separate thread so the Host
thread doesn't have to wait for it.
Only automatically scan for adapters once, when opening the Controllers
window for the first time. Add a Refresh button to let the user refresh
the adapter list afterward.
If you already have a mapping set in the advanced mapping dialog and
want to change it, the easiest way to do it is to press Clear and then
select the new mapping from the list. But pressing Clear causes the
dialog to close, forcing you to open it again, which is inconvenient.
This commit makes it so the Clear button doesn't close the dialog.
This feature allows overriding the frequency of the Vertical Blank Interrupt. For many games, this means that their gameplay speed will change without affecting audio, which would be useful by itself (e.g. grinding in RPGs).
However, there are games that use delta time for their game logic, which allows them to be played at >60 FPS at the same gameplay speed!
Some games aren't dynamic though, and require a patch to adjust their game speed variable.
On real hardware, stswi and stswx don't trigger any of the special
behavior for uncached unaligned writes that was implemented in 543ed8a.
This is confirmed by a hwtest (a new commit in
https://github.com/dolphin-emu/hwtests/pull/42).
This change fixes Dolphin's stswi and stswx implementations so they stop
triggering the special behavior, bringing them back to the behavior they
had before 543ed8a. No games are known to be affected, but Extrems has
reported that it affects homebrew they've made.
This message can be sent a lot when polling inputs from a keyboard. HIDv5.cpp doesn't log INTRMSG in such a way. If needed, log messages can be added into specific devices instead.
Prince of Persia: Sands of Time exhibits screen tearing on FMVs in Dolphin. Tested the setting (suggested by Amphitryon) on PC and Android and can confirm the tearing previously seen is gone with EarlyXFBOutput disabled.
1. Fix Wii Speak SAMPLER_MUTE register:
The register should be 12 (i.e. 0x0c) instead of 0xc0.
2. Fix Wii Speak buffer memcpy size parameter:
It seems to fix random echoes and reduce noises when nobody is speaking.
3. Change the isochronous transfer timing:
It is based on empirical testing.
Based on @noahpistilli (Sketch) PR:
https://github.com/dolphin-emu/dolphin/pull/12567
Fixed the Windows support and the heisenbug caused by uninitialized
members.
Config system integration finalized.
The clone of system memory used by AchievementManager during achievement development for the sake of thread decoupling was only copying MEM1; this grabs MEM2 as well if it exists.
Within AchievementManager, CloseGame being called when LoadGame fails was causing m_queue.Cancel to be called within a lock when Cancel itself locks until it is empty, causing a deadlock. This is resolved by cancelling the queues outside of the lock when they are safe to wait for resolutions.
A new class that derives from `QMenu` has been introduced. Menus of this
`NonAutodismissibleMenu` type will stay visible when a _checkable_
action is triggered.
This is convenient in menus that feature a series of check boxes that
toggle visibility of third components (e.g. the **List Columns** menu),
allowing the user to toggle several actions at once.
For now, the new type is used in the top menu bar.
Verify a touchpad is present before polling it for input. Without this
check the Debug log is spammed with the message "error: Parameter
'touchpad' is invalid" if you have a controller without a touchpad.
One would think every touchpad supports at least 1 finger, but in case
there's some weird edge case check the finger count to be sure.
This fixes a memory leak that would occur when the Android frontend
calls LogManager::Init more than once in order to reload settings.
Note that the log window listener is now owned by LogManager instead of
by the frontend, making it consistent with the other log listeners.
Old cruft from when the Android code was loading INI files manually.
We don't have any handling for failing to load settings anymore.
This change also updates related comments to reflect how things actually
work nowadays.
Add a method to detect console ID from an input file and instruct rcheevos to load as Gamecube or Wii accordingly. Also, hash .wads upon loading, to support achievements on WiiWare titles.
Probably a copy-paste error from layout-ldrtl/list_item_setting.xml.
This error made it so a long setting name could overlap with the
checkbox next to it if Dolphin was running with right-to-left layout.
The incorrect ID was apparently also causing the app:lintVitalRelease
build task to fail. I guess we're not running that build task, because I
only heard of this from someone building Dolphin locally.
Results in a "MSVC_RUNTIME_LIBRARY value 'MultiThreadedDLL' not known for this ASM compiler" otherwise, and zstd doesn't support the relevant ASM code for MSVC anyway.
There's no guarantee that directory initialization has completed by this
point, so we can't safely use NativeLibrary.
I'm making this change because of a crash being reported in Google Play
Console. The exact way it's crashing is mysterious to me, so I'm not
sure if this commit fixes the crash, but I think this commit is
a reasonable change to make even if it doesn't fix the crash. Backtrace
from Google Play Console:
#00 pc 0x0000000000469074 /data/app/~~m0kqybFNfeqnDenQFc53XQ==/org.dolphinemu.dolphinemu-Mtaw0lU8DVUQbte2ZjBp3w==/lib/arm64/libmain.so (std::__ndk1::pair<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>> const, std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>::pair[abi:nn180000]<char const* const&, char const* const&, 0>(char const* const&, char const* const&)) (BuildId: 64cfebf5b574b6729ebc51799aa94ccc3238cbcc)
#01 pc 0x0000000000468e9c /data/app/~~m0kqybFNfeqnDenQFc53XQ==/org.dolphinemu.dolphinemu-Mtaw0lU8DVUQbte2ZjBp3w==/lib/arm64/libmain.so (std::__ndk1::pair<std::__ndk1::__tree_iterator<std::__ndk1::__value_type<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>, std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>, std::__ndk1::__tree_node<std::__ndk1::__value_type<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>, std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>, void*>*, long>, bool> std::__ndk1::__tree<std::__ndk1::__value_type<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>, std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>, std::__ndk1::__map_value_compare<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>, std::__ndk1::__value_type<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>, std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>, std::__ndk1::less<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>, true>, std::__ndk1::allocator<std::__ndk1::__value_type<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>, std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>>>::__emplace_unique_impl<char const* const&, char const* const&>(char const* const&, char const* const&)) (BuildId: 64cfebf5b574b6729ebc51799aa94ccc3238cbcc)
#02 pc 0x0000000000462f08 /data/app/~~m0kqybFNfeqnDenQFc53XQ==/org.dolphinemu.dolphinemu-Mtaw0lU8DVUQbte2ZjBp3w==/lib/arm64/libmain.so (Common::Log::LogManager::GetLogTypes()) (BuildId: 64cfebf5b574b6729ebc51799aa94ccc3238cbcc)
#03 pc 0x000000000044339c /data/app/~~m0kqybFNfeqnDenQFc53XQ==/org.dolphinemu.dolphinemu-Mtaw0lU8DVUQbte2ZjBp3w==/lib/arm64/libmain.so (Java_org_dolphinemu_dolphinemu_NativeLibrary_GetLogTypeNames+56) (BuildId: 64cfebf5b574b6729ebc51799aa94ccc3238cbcc)
#04 pc 0x000000000031456c /data/misc/apexdata/com.android.art/dalvik-cache/arm64/boot.oat (art_jni_trampoline+108)
#05 pc 0x0000000000781508 /apex/com.android.art/lib64/libart.so (nterp_helper+152)
#06 pc 0x00000000002d94d4 /data/app/~~m0kqybFNfeqnDenQFc53XQ==/org.dolphinemu.dolphinemu-Mtaw0lU8DVUQbte2ZjBp3w==/base.apk (org.dolphinemu.dolphinemu.features.settings.ui.SettingsFragmentPresenter.<clinit>+16)
[...]
Previously, PerformanceTracker registered a callback to be updated on
emulation state changes. PerformanceTrackers live in a global variable
(g_perf_metrics) within libvideocommon. The callback was stored in a
global variable in libcore. This created a race condition at shutdown
between these libraries, when the PerfTracker's destructor tried to
unregister the callback.
Notify the PerfTracker directly from libcore, without callbacks, since
Core.cpp already references g_perf_metrics explicitly. Also rename
Core::CallOnStateChangedCallbacks to NotifyStateChanged to better
reflect what it's doing.
Extracted games contain a boot.bin file that contains the disc header.
These boot.bin files are considered valid volumes by Dolphin, since
Dolphin only checks the disc header to determine if something is a valid
GC/Wii disc. Running them doesn't make any sense, though.
boot.bin files used to not be scanned by Dolphin due to their file
extension, but .bin was added to the list of file extensions to scan for
in 494e2c0. To stop them from showing up in the game list, let's update
the ShouldHideFromGameList mechanism.
Different threads are adding and calling callbacks, so this should have
some locking. This is both to ensure thread safety when accessing
`s_callbacks` and to ensure that there won't be situations where a
callback gets called after it's removed.
`s_callback_guards` is also accessed from multiple threads and has
therefore been made atomic.
a1691a4 made it so analytics start events can only be generated when
starting the main activity. However, some users launch Dolphin's
emulation activity from a separate frontend application, bypassing
Dolphin's main activity. This change adjusts the logic so that start
events can be generated if any activity is started after 6 hours of
inactivity. This more closely matches the behavior we had before
a1691a4, while still ensuring duplicate start events aren't generated.
I've also fixed the inconsistent indentation in ActivityTracker.kt.
Require callers of Config::AddConfigChangedCallback and
CPUThreadConfigCallback::AddConfigChangedCallback to handle the returned
ConfigChangedCallbackIDs to hopefully prevent future issues with
callbacks getting called after their associated objects have been
destroyed.
Use a single lambda as a callback which calls InitCustomPaths and
RefreshConfig instead of having separate callbacks for each of them.
This fixes the callback for InitCustomPaths not being removed on
shutdown; the callback for the lambda (previously for RefreshConfig) is
already removed in Shutdown().
Prevent SetHardcoreMode from being called after m_client is set to
nullptr. rc_client_set_hardcore_enabled() checks for nullptr so this
didn't cause any problems, but better not to rely on that.
Also prevents multiple SetHardcoreMode callbacks from piling up when
repeatedly toggling Config::RA_ENABLED.
Remove ConfigChangedCallback in MainWindow's destructor to prevent the
callback from accessing the destroyed MainWindow afterward.
After MainWindow is destroyed UICommon::Shutdown calls
LogManager::Shutdown which ultimately triggers any remaining callbacks.
This resulted in calling MainWindow::OnHardcoreChanged, which crashed in
debug builds and didn't have any obvious effect in release builds.
Fixing an oversight: this was causing the debugger to be disabled if achievements were disabled but hardcore mode was still enabled in the .ini. This fix properly checks for hardcore state via AchievementManager which takes both settings into account.
I've been playing Rock Band 3 recently and have experienced a bug where
sometimes if you disconnect and reconnect a USB microphone, the game
won't pick up on it connecting, not even it you disconnect and reconnect
it again. An investigation into what's going on inside Dolphin shows
that when the game triggers a call to OH0::DeviceOpen after the device
has been reinserted, Dolphin doesn't open the device because it's
already present in m_opened_devices.
Removing the device from m_opened_devices after calling OH0::TriggerHook
in OH0::OnDeviceChange resolves this specific issue in my testing. Doing
this matches us removing the device from m_opened_devices after calling
OH0::TriggerHook in OH0::DeviceClose, but I haven't looked at exactly
what real IOS does.
I have been able to reproduce a much rarer issue that has the same
symptoms on the surface but where OH0::DeviceOpen gets past its
m_opened_devices check. I'm currently not sure what the cause of this
remaining issue is.
If the build folder is created from an older commit and this flag is not set, the last value set for this flag will be used instead.
This is currently happening on our macOS build machine, causing macOS 10.15 to still be used as the deployment target.
71f654c added a new platform in the middle of the C++ platform enum
without updating the corresponding Android code, making the Android code
incorrectly treat Wii discs as WAD files, WAD files as DOL/ELF files,
and so on. This commit fixes the problem.
To be able to add the new Triforce entry into the Platform enum without
it leading to the UI getting an additional tab, I'm splitting the enum
into Platform and PlatformTab. Platform now exactly matches the C++
enum (previously it excluded ELFOrDOL), and PlatformTab has the same
content as the old Platform.
RetroAchievements disables pausing too frequently when running but there's no sense of doing this if RetroAchievements does not currently have a game running.
Some games open two USB interfaces, e.g. /dev/usb/oh0 and /dev/usb/hid.
This was causing us to run two scanning threads at once, using up more
CPU time for scanning than we need to.
We have identified that a failed RetroAchievements game load (most easily done when closing a game before the server can finish responding) can leave data behind that causes problems. As such, refactored CloseGame to always delete data even if there wasn't a game loaded when it was called, and call it on the failure paths of LoadGameCallback.
Instead of having USBScanner create "hooks" as it scans for devices,
let's have USBScanner present a list of devices to USBHost and have
USBHost diff the new device list with its old device list to create the
hook calls instead. This gets rid of some complex edge cases that the
next commit otherwise would have to deal with, in particular regarding
toggling determinism and adding new USBHosts to a USBScanner.
Note: After adding the missing locking of m_devices_mutex, I had to move
the locking of m_hooks_mutex to avoid a random deadlock between the CPU
thread and USB scanning thread. (Either that or I would have to lock
m_devices_mutex before m_hooks_mutex.)
This gets rid of the ugly direct access to USBScanner::m_devices that
was introduced by the previous commit.
This also fixes a potential thread safety issue.
USB_HIDv4::TriggerDeviceChangeReply loops through m_devices and calls
GetDeviceEntry for each device. If USB_HIDv4::TriggerDeviceChangeReply
is called after a new device is added to m_devices but before hooks are
dispatched, GetDeviceEntry crashes, because the hook that's supposed to
update m_device_ids hasn't run yet. With this commit, this issue can no
longer happen, because USBHost::m_devices_mutex doesn't get unlocked in
between updating m_devices and dispatching the hooks.
dolphin-start event was being generated twice for the normal
end-user case, as can be seen in analytics data for some years.
The problem occured when:
* Android reaped the process hosting the dolphin activity
(e.g. for power/memory saving).
and
* Dolphin activity was in "stopped" state for > 6 hours before
being switched back to.
Under above conditions, both calls to ReportStartToAnalytics
would be performed, as dolphin thought it was being launched anew,
and also thought it had been asleep for > 6 hours.
fixes https://bugs.dolphin-emu.org/issues/13675
Due to requests from RA Devs, updating the AchievementManager LoadGameCallback to still set MemoryPeeker (and set m_system) if the load game response is NO_GAME_LOADED, so that the memory inspector et al continue function properly on unidentified hashes. Without this, no memory is loaded and the memory inspector will show all zeroes.
If the development system is started for a game with an unrecognized hash, RA_Integration opens a dialog for connecting the hash with a title. That dialog is prepopulated by the results of GameTitleEstimateHandler.
Displays an additional message when an achievement unlocks that isn't on the site yet (either hasn't yet been uploaded or modified from remote) i.e. achievements the "player" is actively developing.
Update several INI GameSettings for Blue Tongue Entertainment games
Add comments & more Nick games fixes
Adds comments to all FMV fixes and adds even more fixes for Nick games
When you use TimePlayed, you have to provide a game ID either when
creating the object or when calling GetTimePlayed on it. If you don't
provide a game ID when creating the object, function calls that don't
take a game ID will silently fail, except for Reload. This isn't very
obvious, and there's no strong benefit to storing the game ID inside
TimePlayed anyway (it just lets TimePlayed skip calling EscapeFileName),
so this commit removes the TimePlayed constructor that takes a game ID
and instead makes the functions that need game IDs always take a game ID
argument.
It was being done manually, which a TODO comment advised against.
Using generic_string() from std::filesystem::path solves this.
Fix encoding issue using generic_wstring instead.
Fix overlays stacking on top of each other or not moving to the edge of
the screen when enabling or disabling overlays while emulation is
active.
This change only applies when Config::GFX_MOVABLE_PERFORMANCE_METRICS is
False.
This lets you use PS3 Rock Band controllers with Wii Rock Band and
Guitar Hero games.
A normal user will probably never have any reason to disable this
behavior, but I figured maybe there's some person out there who would
like to disable it. (For instance, I know there's a mod for RB3 that's
trying to implement the same kind of cross-console controller
compatibility, and that can only be tested if the behavior I'm adding is
disabled.) So the behavior is controlled by an INI-only setting.
The game sets up a fifo breakpoint callback that just writes a flag to
memory. The hang occurs right after calling GXEnableBreakPt(). It is a
busy loop that repeatedly compares the same register without reloading
it from memory. I guess the developers forgot to make the variable
atomic and never noticed because on hardware the breakpoint is hit
immediately so the flag is already set when it is loaded for the first
(and only) time. This patch grows the loop by one instruction to include
the flag load in the loop.
Removed VolumeChanged signal, as ConfigChanged will trigger what is needed.
Only applies UpdateSoundStream to things that can change during emulation.
Settings::SetVolume might no longer be used, but left it in.
Gecko codes in Dolphin feature a dedicated field for the creator of the
cheat code. When saved into the INI file, the code name and the creator
name are concatenated, and then inserted in the `[Gecko]` section:
```ini
[Gecko]
$<cheat code name> [<creator>]
<code line 1>
<code line 2>
<code line 3>
<...>
$<other cheat code name> [<creator>]
<code line 1>
<code line 2>
<code line 3>
<...>
```
On the other hand, enabled codes are listed under the `[Gecko_Enabled]`
section, but in this case the creator name is omitted from the line:
```ini
[Gecko_Enabled]
$<cheat code name>
$<other cheat code name>
```
Having the creator name in the `[Gecko]` section but not in the
`[Gecko_Enabled]` section is arguably not ideal, but this is legacy
behavior in Dolphin.
The **Cheat Code Editor** dialog is not acknowledging this subtle
behavior in Dolphin: the cheat code name and the creator name *can* be
both inserted in the name field. This issue manifests as an inconsistent
state where a Gecko code that *appears* to be enabled has no effect when
the game is launched.
As part of this fix, the creator name (if present) is now moved into the
dedicated creator field before the code is stored internally.
Test plan:
- Right-click on any game and open the **Properties** dialog.
- Switch to the **Gecko Codes** tab.
- Press the **Add New Code...** button.
- In the **Cheat Code Editor** dialog:
- Enter `This is a test [Jane Doe]` in the **Name:** field.
- Enter `01234567 00000000` in the **Code:** field.
- Press **Save**.
- Observe that the newly added code is now in the list, and *appears* to
be enabled.
- Close the **Properties** dialog.
- Right-click on the same game and open the **Properties** dialog again.
**Without** the fix, the newly added code, while still on the list, has
been inadvertently disabled (it was never really enabled!).
**With** the fix, the newly added code is the list and remains enabled.
This fixes https://bugs.dolphin-emu.org/issues/13695.
Fix the following bug:
* Have a moveable ImGui overlay enabled, such as the Statistics window.
* Pause the game.
* Click and hold on the overlay's title bar as if you were going to move
it. Because the screen isn't updating while the game is paused, you
won't be able to actually move the overlay.
* Press the Frame Advance hotkey several times until it stops
responding.
At this point emulation hotkeys are no longer responsive. This can be
resolved by selecting Play from the toolbar or menu, or selecting Frame
Advance from the menu a couple times, but it's annoying and not obvious
what's gone wrong or how to fix it.
Why the bug is happening:
* Doing a framestep while clicking on the overlay title bar causes ImGui
to set IO.WantCaptureKeyboard to true, indicating that ImGui is
requesting Dolphin ignore any keyboard events while the overlay is
being interacted with.
* Dolphin complies with this request, causing
Host_UIBlocksControllerState to return true and thus setting the input
gate to ignore input.
* IO.WantCaptureKeyboard is only updated when ImGui::NewFrame() is
called, which only happens at the end of each present. It thus remains
true indefinitely since the game paused after the last framestep, and
so Dolphin ignores any hotkeys such as the framestep or play keys.
The fix:
Ignore IO.WantCaptureKeyboard when the game is paused. ImGui can't
meaningfully capture input anyway when the game is paused, so this
shouldn't cause any problems elsewhere.
Once async presentation is implemented we'll want to revert this change,
both because it'll become unnecessary and because ImGui will be able to
do stuff while paused and so suppressing emulation hotkeys will actually
be useful.
This is an Android continuation of bc95c00. We now call
InputDetector::Update immediately after receiving an input event from
Android instead of periodically calling it in a sleep loop. This
improves detection of very short inputs, which are especially likely to
occur for volume buttons on phones (or at least on my phone) if you
don't intentionally keep them held down.
Refactors the AR/Gecko/Patch code approval process to verify from every possible game ini, not just the base game ID. This fixes codes on specific revisions or codes general to any region.
Found via `codespell -q 3 -S "./Externals,./Data/Sys/wiitdb-??.txt,*.po,*.pot" -L andf,asnd,bootup,brocken,bufferin,clen,collet,datas,delt,diety,extint,fpr,inout,inport,interm,nd,nin,ontop,pixelx,re-use,re-used,sav,stateman,strat,transer,wil`
Found via `codespell -q 3 -S "./Externals,./Data/Sys/wiitdb-??.txt,*.po,*.pot" -L andf,asnd,bootup,brocken,bufferin,clen,collet,datas,delt,diety,extint,fpr,inout,inport,interm,nd,nin,ontop,pixelx,re-use,re-used,sav,stateman,strat,transer,wil`
As the PS2 version is the only one with proper 16:9 widescreen, this cheat brings widescreen to the Gamecube version. This cheat has been tested on the NTSC version, but is stated to be region free.
In PPCTables.cpp, the code is currently unused so I was unable to test it.
In CustomPipeline.cpp, a pointer to member function cannot be used due to 16.4.5.2.1 of the C++ Standard regarding "addressable functions". https://eel.is/c++draft/namespace.std#6
In Fs.cpp and DirectoryBlob.cpp, these examples used projections in a previous iteration of this commit, but no longer do. Still, they remain in this commit because the PR they would actually belong to is already merged.
In LabelMap.cpp, the code is currently unused so I was unable to test it.
In WiiUtils.cpp, the magic value `1u` was replaced by the constant value `DiscIO::PARTITION_UPDATE`.
Found via `codespell -q 3 -S "./Externals,./Data/Sys/wiitdb-??.txt,*.po,*.pot" -L andf,asnd,bootup,bufferin,clen,collet,datas,delt,fpr,inout,inport,interm,pixelx,re-use,re-used,sav,stateman,strat,wil`
Clamp overlays to the render window (with some padding), reset their
positions when the render window changes sizes, and add a setting to
enable moving the overlays (off by default, .ini only for now).
This adds the option to configure real Wiimotes by specifying their Bluetooth addresses in
the configuration file. This allows off-brand Wiimotes to work without using the
Bluetooth Passthrough option, if you know their Bluetooth addresses beforehand.
Despite correctly setting the LAP to `0x9e8b00` in `WiimoteScannerLinux::FindWiimotes`
while scanning, which is indeed enough to make off-brand / knock-off Wiimotes respond to a
Bluetooth Inquiry, some (several? all?) bluetooth adapters seem to override and ignore
this given LAP value when performing the Inquiry, and actually use the `0x9e8b33` value as
if a null pointer have been given to `hci_inquiry`, as inspection of USB/Bluetooth packets
by Wireshark indicate. Off-brand Wiimotes don't respond to inquiries with this LAP.
If one happens to know the Bluetooth address of their Wiimote (for example, by checking
`BluetoothPassthrough.LinkKeys` after using Bluetooth Passthrough, or other means such as
directly using `libusb` to force the adapter to use the correct LAP in the Inquiry), then
it's enough to add those addresses to the vector of found Wiimotes.
Since this a niche use case and I only happen to know and have tested in Linux, this
change only affects the `WiimoteScannerLinux` backend. It's likely that it could be added
to other backends, but I'm unfamiliar with these.
If no addresses are given or this config section does not exist, behavior is completely
unchanged.
Introduce a new "Enable Time Tracking" checkbox in the InterfacePane UI. The checkbox is dynamically enabled or disabled based on the emulation state, preventing changes while emulation is active.
Creates TimePlayed class and implemented constructors, AddTime, GetTimePlayed, and Reload methods. Updates CMakeLists.txt and DolphinLib.props as appropriate.
I think someone confused these with the actual token and bounding box
registers in PE, which were added later. In CP they never did anything
and it's suspicious that they have the same addresses as their PE
counterparts. On real hardware they always read as zero.
Move ImGui::End() calls out of if(ImGui::Begin()) blocks.
Quoting from ImGui::Begin's function comment in imgui.cpp:
"You always need to call ImGui::End() even if false is returned."
In practice this didn't cause problems because the windows don't have
title bars and thus can't be collapsed, and so the block containing
::End would always run, but let's do it the right way.
Instead of having UserDataImportWarningDialog set an
`onResultDismiss` callback that examines `mustRestartApp`, and having
UserDataActivity set `mustRestartApp`, just have UserDataActivity set
the callback directly.
This approach is no more data-race-y than the previous approach, and it
simplifies the code. (The behavior of restarting the app when the task
finishes is specific to the user data import flow, and there is no
reason for TaskViewModel to be directly aware of it.)
You can encode a shifted 12-bit immediate in a SUB instruction on ARM64.
We exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52a00218 mov w24, #0x100000 ; =1048576
0xcb180379 sub x25, x27, x24
After:
0xd1440379 sub x25, x27, #0x100, lsl #12 ; =0x100000
You can encode a 12-bit immediate in a SUB instruction on ARM64. We can
exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x5280003a mov w26, #0x1 ; =1
0xcb1a033b sub x27, x25, x26
After:
0xd100073b sub x27, x25, #0x1
While we cannot always avoid materializing immediates, we can still
inspect the most significant bit and potentially skip sign extension.
This can sometimes save an instruction.
Before:
0x5280003a mov w26, #0x1 ; =1
0x93407f5b sxtw x27, w26
0xcb38c37b sub x27, x27, w24, sxtw
After:
0x5280003a mov w26, #0x1 ; =1
0xcb38c35b sub x27, x26, w24, sxtw
Before:
0x52a20018 mov w24, #0x10000000 ; =268435456
0x93407f79 sxtw x25, w27
0xcb38c339 sub x25, x25, w24, sxtw
After:
0x52a20018 mov w24, #0x10000000 ; =268435456
0x93407f79 sxtw x25, w27
0xcb180339 sub x25, x25, x24
You can encode a shifted 12-bit immediate in an ADD instruction on
ARM64. If the negated constant fits in this range, we can exploit this
to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52bff01a mov w26, #-0x800000 ; =-8388608
0x93407f1b sxtw x27, w24
0xcb3ac37b sub x27, x27, w26, sxtw
After:
0x93407f1b sxtw x27, w24
0x9160037b add x27, x27, #0x800, lsl #12 ; =0x800000
You can encode a 12-bit immediate in an ADD instruction on ARM64. If the
negated constant fits in this range, we can exploit this to avoid
materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x12800019 mov w25, #-0x1 ; =-1
0x93407f5b sxtw x27, w26
0xcb39c37b sub x27, x27, w25, sxtw
After:
0x93407f5b sxtw x27, w26
0x9100077b add x27, x27, #0x1
You can encode a shifted 12-bit immediate in a SUB instruction on ARM64.
Constants in this range do not need to be sign extended, so we can
exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52a00099 mov w25, #0x40000 ; =262144
0x93407f7a sxtw x26, w27
0xcb39c35a sub x26, x26, w25, sxtw
After:
0x93407f7a sxtw x26, w27
0xd141035a sub x26, x26, #0x40, lsl #12 ; =0x40000
You can encode a 12-bit immediate in a SUB instruction on ARM64.
Constants in this range do not need to be sign extended, so we can
exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52800416 mov w22, #0x20 ; =32
0x93407f78 sxtw x24, w27
0xcb36c318 sub x24, x24, w22, sxtw
After:
0x93407f78 sxtw x24, w27
0xd1008318 sub x24, x24, #0x20
A number of settings in the `debugger` group were wrongly using a newly
constructed `QSettings` object instead of the singleton object that
`GetQSettings()` provides.
This made the application create a spurious, extra configuration file in
the user directory:
```
~/.config/Dolphin Emulator/dolphin-emu.conf
```
Notice that, by default, the application configuration files are stored
in `~/.config/dolphin-emu`; not in `~/.config/Dolphin Emulator`.
Adding a community-requested list of Gecko and Action Replay codes to the allowlist. Many of these codes were from the wiki and are being added to Dolphin's repo for the first time.
Change the displayed controls in the TAS Input window when the
controller's extension (including MotionPlus) is changed.
This previously required restarting Dolphin after the attachment was
changed, as the controls were never updated after the WiiTASInputWindow
was created at Dolphin startup.
When I wrote 71e9766519, there was an interaction I didn't take into
account: When setting eq, SetCRFieldBit assumes that all bits in the
passed-in host register except the least significant bit are 0. But if
we use EON or ORN, all bits except the least significant bit get set to
1. This can cause eq to end up unset when it should be set.
This commit fixes the issue.
crandc is unaffected by the issue because the "1" bits get ANDed with
"0" bits from the first operand.
Note that in practice, we never have both bits_1_to_31_are_set and
negate at once, so while it looks like this commit adds an extra AND
instruction in some cases, those cases don't happen in practice, meaning
this fix shouldn't affect performance.
QCheckBox::toggled and other similar signals are used to save changes and to update widget status (such as enabled).. OnConfigChanged needs to load new values and trigger widget updates, but the new value shouldn't trigger a save. A save is unnecessary (the config has the correct values and the UI is being updated to those values) and it'd trigger another ConfigChanged signal. This commit blocks the save without blocking the signal entirely.
The computed value is only used when the register is equal to zero, so
we can fully precompute it and materialize the constant instead. In
other words, we change from
```
return reg == 0 ? (reg | 1ULL << 63) : reg;
```
to
```
return reg == 0 ? 1ULL << 63 : reg;
```
The number of instructions remains the same, but we eliminate an
unnecessary dependency on the register value.
Before:
0xb241037a orr x26, x27, #0x8000000000000000
0xeb1f037f cmp x27, xzr
0x9a9a137b csel x27, x27, x26, ne
After:
0xd2f0001a mov x26, #-0x8000000000000000 ; =-9223372036854775808
0xeb1f037f cmp x27, xzr
0x9a9a137b csel x27, x27, x26, ne
In NandPaths.cpp, the `std::initializer_list<char>` of illegal characters has been turned into a `char[]` (similar to the one in GameList.cpp).
The reverse iteration in ResourcePack.cpp seemed to provide no benefits, and doing without it it seemed to have no ill effects.
The new `Common::Contains` and `Common::ContainsSubrange` function objects mirror C++23's `std::ranges::contains` and `std::ranges::contains_subrange`, respectively.
Recently there was some issues in TASVideos trying to sync a Donkey Kong Country Returns TAS. It eventually was synced by directly using the config from the TAS author. The exact setting which caused the desync was narrowed down to being in SYSCONF, with the country code. The TAS author lives in the US, so the country code matched the US country code, while the person attempting to sync the TAS did not live in the US.
Adding SYSCONF country code to the DTM should avoid this being an issue for future Dolphin versions.
When the input register and carry flags are known, we can always
precompute the result.
We still materialize the immediate when the condition register
needs to be updated, but this seems to be a general problem. I might
look into that one day, but for now this'll do.
- ConstantFalse
Before:
0x52800119 mov w25, #0x8 ; =8
0x2a1903fa mov w26, w25
After:
N/A
- ConstantTrue
Before:
0x52800119 mov w25, #0x8 ; =8
0x1100073a add w26, w25, #0x1
After:
N/A
Same optimization we did for subfex. Skip loading the carry flag into a
temporary register first when we're dealing with zero.
Before:
0x394bd3b8 ldrb w24, [x29, #0x2f4]
0x2a1803f9 mov w25, w24
After:
0x394bd3b9 ldrb w25, [x29, #0x2f4]
When both the input register and the carry flag are constants, the
result can be precomputed.
Before:
0x52800016 mov w22, #0x0 ; =0
0x2a3603f6 mvn w22, w22
After:
The result is either -1 or 0 depending on the state of the carry flag.
This can be done with a csetm instruction.
Before:
0x1280001a mov w26, #-0x1 ; =-1
0x1a1f035a adc w26, w26, wzr
After:
0x5a9f23fa csetm w26, lo
When the immediate is zero, we can load the carry flag from memory
directly to the destination register.
Before:
0x394bd3b8 ldrb w24, [x29, #0x2f4]
0x2a1803f9 mov w25, w24
After:
0x394bd3b9 ldrb w25, [x29, #0x2f4]
To my knowledge, all of the GameCube versions of *Metroid Prime* and *Metroid Prime 2: [Dark] Echoes* only support 4:3, not 16:9 .
Currently, Dolphin's widescreen heuristic will fail to detect this and will erratically switch between 4:3 and 16:9 when Aspect Ratio is set to Auto.
These changes prevent the erratic aspect ratio switching by manually declaring that the game is solely 4:3.
Resolves duplicate OSD messages for Loading and Found custom textures.
VideoBackend initialization results in HiresTexture::Init being called.
We already call HiresTexture::Update when OnNewTitleLoad is called.
Thus we can remove HiresTextures::Init completely as it is redundant.
All valid PPC imm masks (except for all zeroes and all ones) are also
valid AArch64 imm masks. This lets us optimize things a little.
Note that because I'm now ANDing rS before rotating it, its AND mask
is rotated left. All AArch64 imm masks can be rotated by any amount and
still be valid AArch64 imm masks.
No games seem to use this, so this isn't useful as a performance
optimization, but it's required for correctness because the (sh == 0)
case of our implementation doesn't handle zero masks.
In JitRegCache.cpp, the lambda predicate were replaced by a pointer to member function because ranges algorithms are able to invoke those.
In ConvertDialog.cpp, the `std::mem_fn` helper was removed because ranges algorithms are able to handle pointers to member functions as predicates.
In BoundingBox.cpp, the lambda predicate was returning the bool element unchanged, so `std::identity` was a better fit.
In WiimoteReal.cpp, JitRegCache.cpp, lambda predicates were replaced by pointers to member functions because ranges algorithms are able invoke those.
In ConvertDialog.cpp, the `std::mem_fn` helper was removed because ranges algorithms are able to handle pointers to member functions as predicates.
In DITSpecification.cpp, MaterialAsset.cpp, and ShaderAsset.cpp, lambda predicates were replaced by pointers to member functions because ranges algorithms are able invoke those.
In NetPlayClient.cpp, the non-trivial `NetPlay::Player` elements were being passed by value in `NetPlayClient::DoAllPlayersHaveGame()`. This has been fixed.
In WIABlob.cpp, the second example's predicate was returning the `std::optional` by value instead of implicitly converting it to a bool. This has been fixed.
Creates a layer outside the game config layer system and passes it to the created gfx widows, so as to not interfere with the global config system.
Supports multiple game properties being open at once.
Supports editing while a game is playing, but the options only save and update the active game when the window is closed.
Right-clicking will remove a property from the game ini.
New code adds a test failure if there's a Patches/Gecko/AR_Retroachievements_Verified code that doesn't appear to actually exist in the file. This will catch if the allowed patch is formatted wrong, which I found happening several times already due to not realizing that the patch author's name would need to be omitted.
Prefer BLENDVPD over VBLENDVPD if the latter doesn't save any
instructions.
VBLENDVPD allows separate source and destination registers, which can
eliminate a MOVAPD/MOVSD. However, on Intel since Skylake, VBLENDVPD
takes additional uops to execute compared to BLENDVPD (according to
https://uops.info). On AMD and older Intel microarchitectures there is no
difference.
Some generators (like Unix Makefiles and Xcode) copy an app's Info.plist at configure time.
This causes a problem when we need to generate the Info.plist at build time, like how we
currently do it with ScmRevGen. Instead of generating the Info.plist directly in ScmRevGen,
provide an Info.plist without any version information to CMake at configure time, have
ScmRevGen generate a separate plist file with the version information at build time, and
then merge the two together to create the final Info.plist.
The read thread could call Reset, which in turn tried to join the read
thread, leading to a SIGABRT. This manifested as Dolphin consistently
crashing when disconnecting a GC adapter and having a chance of crashing
a few seconds after connecting a GC adapter.
Now that patches and codes are enabled on a case by case basis, remove patcher code blocking codes entirely in hardcore mode, and reword the warning to be more accurate.
This apparently didn't compile on macOS six years ago before c++20, but
it should be fine by now.
While I'm at it, make the constants upper case per convention.
If the host is in hardcore mode, all joining players will be set to hardcore mode; if not, all joining players will be set to softcore. This ensures all players have the same settings and remain synchroized.
The primary focus of this PR is the Eternal Darkness patch which fixes hanging at startup, which prior to this fix makes Eternal Darkness unplayable in hardcore. The MHTri patch was added as well simply because it could be.
GXAbortFrame() is problematic for Dolphin because it first writes
PI_FIFO_RESET (for which we discard our internal fifo), then disables CP
reads (for which we execute pending commands in the GP fifo in emulated
memory). I don't know whether there is a race condition on hardware, but
there is one for us. Avoid this by also doing a GPU sync here.
The value being stored must be loaded into a register. In the case of an
immediate value, this means it must be materialized. The value is
eventually byteswapped before performing the store.
This can be simplified for the value 0 for two reasons:
- ARM64 has a dedicated zero register, so does not need to be
materialized.
- Byteswapping zero is still zero, so we can skip this step.
We could skip byteswapping for other values by immediately materializing
the byteswapped value in a register, but the benefits are not so clear
there (if the value needs to be materialized anyway, it is better to do
it up front).
Before:
0x5280001b mov w27, #0x0 ; =0
0xb9404fba ldr w26, [x29, #0x4c]
0x12881862 mov w2, #-0x40c4 ; =-16580
0x0b020342 add w2, w26, w2
0x5ac00b61 rev w1, w27
0xb8226b81 str w1, [x28, x2]
After:
0xb9404fbb ldr w27, [x29, #0x4c]
0x12881862 mov w2, #-0x40c4 ; =-16580
0x0b020362 add w2, w27, w2
0xb8226b9f str wzr, [x28, x2]
Unlike on x64, inverting EQ or GT in SetCRFieldBit saves us one
instruction. Also unlike on x64, inverting SO or LT in GetCRFieldBit
requires an extra instruction (just like in SetCRFieldBit). Due to this,
replacing an invert in GetCRFieldBit with an invert in SetCRFieldBit
when possible is either equally good or better - never worse.
The game calls GXSetDrawDone and then switches the GP fifo without first
waiting for the draw done interrupt to arrive. Before
e96960e2a6, Dolphin would not execute the
draw done command and potentially also skip other commands in the old GP
fifo. Since that commit, Dolphin executes the remaining commands on the
old GP fifo just before disabling reads for switching, but because
PixelEngineManager::RaiseEvent() enforces a minimum delay of 500 cycles
for the draw done interrupt, it arrives after the game has switched to
the new GP fifo which seems to trigger the deadlock.
This patch replaces the call to GXSetDrawDone by a call to GXDrawDone
which does the same but also waits for the interrupt.
MUL and SUB can be combined in one instruction.
Before:
0x1b1a7c01 mul w1, w0, w26
0x4b010318 sub w24, w24, w1
After:
0x1b1ae018 msub w24, w0, w26, w24
Removes the EFBAccessEnable=false explicit game overrides for:
GT6 (Terminator 3: The Redemption)
GXB (SSX3) [deleted - no other configuration]
RTH (Tony Hawk's Downhill Jam)
SNC (SONIC COLOURS) [deleted - no other configuration]
Makes Graphics -> Hacks -> Skip EFB Access from CPU enabled by default. Some GPU drivers stall when EFB access occurs in games where EFB is not used. Most games that require this setting set to 'true' already have this defined in their game inis.
Adjusts the Texture Cache settings/slider to 512 samples which equates
to the 'middle' option in the UI.
If using the 'Safe' Texture Cache Accuracy mode, the left screen will only render bloom in 2P modes.
If using the 'Fast' Texture Cache Accuracy mode, the Intro Movie will
drop frames near the end when the "Shadow the Hedgehog" game title
letters appear. This mode also can result in artifacts/bleed from bloom
effects in some situations.
`std::erase` is a replacement for the remove-erase idiom.
Changes to `OpenModeToAndroid` inadvertently revealed that the prior implementation had UB (potentially deleting the end iterator). This is now fixed.
Three bugs specific to older Wii games:
- The size difference between high-pass and biquad filter was not
accounted for, causing wiimote related fields to be corrupted.
- Wiimote sample buffer pointers were advanced by 32 samples per
millisecond instead of 6 samples. Usually hidden by the first bug.
- PB updates on Wii were being byte-swapped twice, but I've not actually
found any Wii games that make use of PB updates.
This fixes wiimote audio in at least the following games:
- Excite Truck
- Ice Age 2: The Meltdown
- Kororinpa: Marble Mania
- Rapala Tournament Fishing
- Shrek the Third
- Super Monkey Ball: Banana Blitz
- Tiger Woods PGA Tour 07
- WarioWare: Smooth Moves (issue 11725)
- Wing Island
Recently we have been getting some requests to make the existing vsync
setting available in the Android GUI:
https://bugs.dolphin-emu.org/issues/13650https://forums.dolphin-emu.org/Thread-vsync-toggle-for-android
I don't quite understand why enabling the vsync setting is helpful when
Android already enforces vsync, but I guess having the option available
doesn't hurt. I'm putting the setting under Advanced, unlike in
DolphinQt, since there's no clear reason why the typical user would want
to use this setting.
Fixes LIT (https://bugs.dolphin-emu.org/issues/13635). The text does not include normals, but has lighting enabled. With the previous default of (0, 0, 0), lighting was always black (as dot(X, (0, 0, 0)) is always 0). It seems like the normal from the map in the background (0, 0, 1) is re-used.
LIT also has the vertex color enabled while vertex color is not specified, the same as SMS's debug cubes; the default MissingColorValue GameINI value of solid white seems to work correctly in this case.
No need to materialize the immediate if it is zero, we can just use WZR.
Before:
mov w27, #0x0 ; =0
str w27, [x29, #0x1178]
After:
str wzr, [x29, #0x1178]
In VolumeVerifier.cpp, constructing a `std::string_view` of the volume's GameID is unnecessary, as `std::`(`ranges::`)`binary_search` supports heterogeneous lookup. The usage in GameFile.cpp is a perfect example.
In OGLConfig.cpp, `std::views::reverse` is used rather than sorting using `std::ranges::greater` in order to parallel other instances of reverse iteration in the function.
In DSPCore.cpp, there were two `std::fill` uses that could be simplified using `std::fill_n`. Due to their proximity with other `std::fill` algorithms being modernized with ranges, I chose to make these examples into the rare `std::ranges::fill_n`.
In StringUtil.h, the lambdas wrapping `Common::ToLower(char)` and `Common::ToUpper(char)` were only necessary due to the function names being overloaded.
Many games call GXSetGPFifo() without first waiting for the GP to finish
consuming outstanding commands in the previous GP fifo. Normally,
Dolphin runs OpcodeDecoding in 1000-cycle time slices. In that time
frame, GXSetGPFifo() has probably completed and the GP read pointer now
points to entirely new memory. If the last GP fifo copy ended in an
incomplete command, the new GP fifo would most likely desync for a
while. To avoid all this, give the GP a time slice right now to copy the
remaining data from the previous GP fifo.
Indexed XF loads specify the number of 32-bit words (generally floats, but light data has some integers) to load, not the number of bytes. This was only a mistake in the fifo analyzer text; the actual implementation already loaded words.
The light LIT fifolog from https://bugs.dolphin-emu.org/issues/13635 has position data at physical address 11ae3180. This works fine when using the memory viewer in physical mode, but the corresponding virtual address (91ae3180) previously didn't show anything in effective mode. It works fine now though.
This shouldn't affect playback of fifologs as everything in there uses physical addresses; this only impacts the memory viewer.
This logic was copied from CBoot::SetupBAT.
This reverts the revert commit bc67fc97c3,
except for the changes in BaseConfigLoader.cpp, which caused the bug
that made us revert 72cf2bdb87. PR 12917
contains an improved change to BaseConfigLoader.cpp, which can be merged
(or rejected) independently.
A few changes have also been made based on review comments.
`EFBEmulateFormatChanges = True` properly emulates the blur in the pause screen.
`ImmediateXFBEnable = False` to prevent epilepsy-inducing FMVs and main menu.
`EFBEmulateFormatChanges = True` properly emulates the blur in the pause screen.
`ImmediateXFBEnable = False` to prevent epilepsy-inducing FMVs and main menu.
Found this bug while testing; if I manually edit the config files while Dolphin is closed I was able to get debug and hardcore on at the same time, this resolves that.
AchievementManager::SetHardcoreMode now handles the (non-Qt) settings disabled by hardcore mode, instead of doing this on the Qt layer. Also ensured Init/Enable Achievements paths run this code, fixing the bug wherein the player can manipulate things when achievements are disabled that persist when turned back on.
This reverts commit 6dad8f8372.
Our bundled zlib-ng uses zlib compat mode, making it override system zlib.
System zlib-ng will not, and all its functions will be prefixed with zng_.
Therefore the two aren't actually compatible.
The use of any anti-aliasing will cause graphical corruption, which occurs on the ground.
MaxAnisotropy is supposed to be for [Video_Enhancements], but also it doesn't cause any of the issues in game so it is being removed rather than set under the correct heading.
Added a comment on why these values are set.
These codes are actually Gecko codes so setting that correctly.
There were errors which pop up when running this game as the comments for AR codes need to be set with hash(#) instead of asterisk(*). I replaced those anyways.
Removed the url in the comment since it's inaccessible and not on wayback machine either.
Also corrected the GameID, the wrong one is listed.
Dolphin has been using edge-to-edge rendering for a little while now,
but it has required a bit of manual work. Now that edge-to-edge is
becoming something expected of apps in Android 15, there's a nicer API
we can use.
Tested on Android 8, 11 and 13, with no changes in behavior noted.
So far, Dolphin hasn't been able to run on Android devices that use a
16 KiB page size. 16 KiB page sizes are a very new Android feature that
no phones have shipped with so far, so we're still compatible with the
phones that exist out there, but let's get this fixed before phones
start shipping with 16 KiB page sizes.
Because I couldn't get Android Studio's emulator to work, I haven't been
able to confirm that this change actually makes Dolphin fully compatible
with devices that use a 16 KiB page size. But I have confirmed that this
doesn't break anything on a regular 4 KiB page size device.
Prevent potential issues when creating the Graphics window (and thus
calling PopulateBackendInfo) while the core state is Stopping, like we
already do while it's Starting or Running.
Remove the PopulateBackendInfoFromUI function, which had a single caller
(GraphicsWindow::OnBackendChanged) and checked that the core wasn't
running or starting before calling PopulateBackendInfo.
Move the core state check into PopulateBackendInfo and have
OnBackendChanged call that instead. This guarantees the check is
performed by all callers of PopulateBackendInfo, preventing
potential reintroduction of the crash fixed in 3d4ae63f if another call
to PopulateBackendInfo is added.
As of the previous commit the only other caller of PopulateBackendInfo
is Core::Init shortly before s_state is set to Starting, so it will
always pass the check and so maintain its current behavior.
Remove the second of two calls to PopulateBackendInfo during emulation
startup. This call was originally the only one, but b214e0e added an
earlier call to handle the backend being changed by the GameINI.
The PR discussion doesn't explain why the original call was left in; I
suspect it was just overlooked.
As a bonus, this removes one of the extra copies of the "Video Info" On
Screen Display message at startup when using OpenGL.
Fix a crash when opening the Graphics window for the first time during
emulation startup when the backend is Vulkan, D3D11, or D3D12.
Don't call PopulateBackendInfo() from the Host thread when the core is
starting up. First, the function has already been called in Core::Init()
so we don't need to again. More importantly, PopulateBackendInfo() calls
g_video_backend->InitBackendInfo(), and the Vulkan and D3D
implementations of those functions load and then unload libraries (and
their associated function pointers) which are potentially in use by
other threads.
This crash was reliably reproducible with the following steps:
1) Select an affected backend.
2) Enable "Compile Shaders Before Starting"
3) Delete the cached shaders (but not the .uidcache file) for the game
you're testing.
4) Close and reopen Dolphin.
5) Start the game.
6) While the game is still booting or compiling shaders, open the
Graphics window for the first time in that Dolphin session.
Fixes https://bugs.dolphin-emu.org/issues/13634.
Before, Dolphin would randomly crash when updating the cheat search when automatic refresh was enabled. (Having a large number of addresses listed, e.g. by starting with an "any value" search, may contribute). The crash was due to QTableWidget::item returning nullptr in RefreshGUICurrentValues, presumably due to the table being resized on the UI thread while the emulated CPU thread was updating the values. I've fixed this by pausing the CPU thread for the entirety of OnNextScanClicked; this eliminated crashes in my testing.
With 12 uses of `JoinStrings` in the codebase vs 36 uses of `fmt::join`, fmtlib's range adapter for string concatenation with delimiters is clearly the preferred option.
Migrating `Common::CaseInsensitiveLess` to StringUtil.h will hopefully discourage rolling one's own solution in the future for case-insensitive associative containers when this (quite robust!) solution already exists.
`Common::CaseInsensitiveStringCompare::IsEqual` was removed in favor of using the `Common::CaseInsensitiveEquals` function.
The `a.size() != b.size()` condition in `Common::CaseInsensitiveEquals` can be removed, since `std::ranges::equal` already checks this condition (confirmed in libc++).
There were three distinct mechanisms for signaling breakpoint changes in DolphinQt, and the wiring had room for improvement. The behavior of these signals has been consolidated into the new `Host::PPCBreakpointsChanged` signal, which can be emitted from anywhere in DolphinQt to properly update breakpoints everywhere in DolphinQt.
This improves a few things:
- For the `CodeViewWidget` and `MemoryViewWidget`, signals no longer need to propagate through the `CodeWidget` and `MemoryWidget` (respectively) to reach their destination (incoming or outgoing).
- For the `BreakpointWidget`, by self-triggering from its own signal, it no longer must manually call `Update()` after all of the emission sites.
- For the `BranchWatchDialog`, it now has one less thing it must go through the `CodeWidget` for, which is a plus.
The wrong filename was used so the settings weren't being applied.
The graphical issues reported were from enhancements that create graphical issues.
EFBToTextureEnable solves some graphical issues but those issues appear for only a few frames, the bulk of the game does not benefit while the setting while it is very sore on performance.
includes the following:
- org.DolphinEmu.dolphin-emu.metainfo.xml.in this file contains general
information and metadata that is used by most linux based app stores
(kde discover, gnome software, flathub.org, etc) to showcase dolphin.
- fill_release_node.sh a script to automatically fill in the release
information in the metainfo file when building the flatpak.
- SDL2.json manifest to build the vendored version of SDL from the
Exports directory, it's only temporarily needed until the kde runtime
is updated with the current SDL2 version and should be deleted after.
- org.DolphinEmu.dolphin-emu.yml the manifest itself.
Arbitrary Mipmap Detection doesn't work when GPU Texture Decoding is
enabled, so disable GPU Texture Decoding for games where the .ini
enables Arbitrary Mipmap Detection.
Co-authored-by: jeremyie <73066289+McAchi@users.noreply.github.com>
If texture dumping is enabled, notify the user on emulation startup
using an On Screen Display message.
Also notify the user when texture dumping is toggled.
Addresses https://bugs.dolphin-emu.org/issues/12445.
The low-pass and biquad filters run in set40 mode where accessing ac#.m
returns the value of ac#.hm clamped to 16 bits.
This fixes the crackling in "Need for Speed: Nitro" (issue 13610).
Also make the lower bound match hardware (-0x8000 instead of -0x7FFF).
During 25-bit rounding, subnormals are "normalized"
This would normally mean that the exponent needs to be able to be <-1023
Instead, you can modify at what bit you round and get the same results!
This is done by finding the highest bit and shifting right the round bit
Co-Authored-By: JosJuice <josjuice@gmail.com>
Changes integer rounding to more closely meet the documentation
The documentation explains to round before doing any bounds checks
All this really does is make sure some exception bits won't be set wrong
This depends on the rounding mode, fixing cases such as:
- Round to even, (0x7fffffff, 0x7fffffff.8)
- Round to down, (0x7fffffff, 0x80000000)
This change also uses some standard functions for rounding
Previously using them was casting to an s32 directly, now keeps the f64
RoundToIntegerMode introduced due to roundeven not being part of C++17
Finally, it can change a >0x7fffffff to >=0x80000000, done because:
- It looks nicer now with integers (I liked 0s)
- It gives ever so slightly better codegen on Aarch64
Co-Authored-By: JosJuice <josjuice@gmail.com>
I wasn't aware that even with a size of zero, it's still not safe to pass a nullptr to `std::memcpy`. When `CachedInterpreterEmitter::PoisonCallback` is written, UB is happening.
Invert conditions, invert decrement checks, and make conditional branches unconditional. USnapshotMetadata in prior versions of Dolphin is forward-compatible with these changes (tested on x86_64).
Objects which get parented automatically by later processing now pass a nullptr to the constructor to make the intent clearer. Also fixed "true" and "false" not being translatable strings.
This is a minor improvement to add line numbers to the LOG_VULKAN_ERROR
define. Basically error logs for Vulkan will now look like:
```
// This
25:03:347 VideoBackends/Vulkan/VulkanLoader.cpp:247 E[Video]: (WaitForCommandBufferCompletion:278) vkWaitForFences failed: (2: VK_TIMEOUT)
// Instead of
15:45:154 VideoBackends/Vulkan/VulkanLoader.cpp:247 E[Video]: (WaitForCommandBufferCompletion) vkWaitForFences failed: (2: VK_TIMEOUT)
```
Set the Render Window as the parent of the Confirm On Stop confirmation
dialog when Keep Window On Top is enabled, ensuring it will always be
visible.
Previously, when Confirm On Stop and Keep Window On Top were both
enabled the Confirm On Stop dialog could be hidden by the render window
in the following situations:
* Clicking Stop in the Main Window
* Clicking the Main Window's close button
* Pressing the Stop hotkey while in FullScreen mode
This was particularly troublesome because the confirm dialog is modal,
preventing the user from moving the render window out of the way if it
was obscuring the dialog.
Fixes https://bugs.dolphin-emu.org/issues/13247.
A vector of length 0 can have a null data pointer, which causes UB when
passed to memcpy, so only copy when we actually have data to copy. This
caused crashes in certain cases when compiling Dolphin with Clang and
LTO enabled.
Allow connecting or disconnecting multiple Wii Remotes simultaneously
instead of only handling the highest index whose hotkey is pressed. This
allows using a single hotkey to toggle multiple remotes.
Before the call to OnSelectionChange, m_code_edit and m_code_remove are
disabled and UpdateList calls m_code_list->clear(), thereby deselecting
any selected items.
When no items are selected, OnSelectionChange disables m_code_edit and
m_code_remove and then returns. Since that was already done, the call
doesn't change anything and can be removed.
Create ARCodeWidget and GeckoCodeWidget once on startup rather than
every time a game is launched or shutdown.
In addition to losing focus on the tab (since the previous widget and
tab no longer existed), the behavior prior to this commit could cause a
crash if the user initiated a game shutdown and then opened a code edit
window since the AR/GeckoCodeWidget would get deleted in the meantime.
Also some minor refactoring of nearby/related code:
* Make non-obvious variable types explicit instead of auto.
* Throw some consts around.
* Use setDisabled(empty) instead of setEnabled(!empty).
When we boot the core, it needs to have a valid surface to draw graphics
to. Our Kotlin code does wait for a valid surface to exist before it
calls NativeLibrary.Run, but there's a chance for the surface to be
deleted before Run locks s_surface_lock. If that happens, the core boots
without a valid surface, which presumably would cause a crash. (I
haven't been able to reproduce the problem myself.)
Changes the RetroAchievements "Log In" button's text to "To log in, stop the current emulation." when the button is disabled because an emulation session is active. This allows a user to understand why the button is disabled, and how this state can be resolved.
Previously, it could be unclear why this button was disabled without an understanding of the underlying system.
Co-Authored-By: JosJuice <josjuice@gmail.com>
The description of the Speed Limit setting currently uses a lot of
complicated terms, like "emulated time" (known to many Dolphin
developers, but in my experience not known by even advanced emulator
users) and "maximum time scale" (I have never heard it before). The
meaning of "sustainable" is also unclear in context.
This commit rewords the description to be easier to understand.
Fixes https://bugs.dolphin-emu.org/issues/13593. Before, it would attempt to
use the old shader, which did not exist for the new stereo mode. Changing the
postprocessing shader afterwards would work properly, although passive 3D only
has one option, so it was just broken without restarting Dolphin.
This also fixes the UI not updating when using one of the stereo toggle hotkeys.
These patches were added in bde9a459cd
and enabled by default in 36ecfdd6b5.
They allowed the game to run in Dolphin but disabled dynamic shadows.
The game adds 4 to the start address of otherwise valid display lists
for no obvious reason. Now that Dolphin forces 32-byte alignment these
patches are no longer needed.
Input/output tracking is intended to speed up incremental builds by
skipping a target when it doesn't need to be built. However, this seems
to be unreliable for UnitTests' AfterBuild target. Let's remove it.
It's still the case that UnitTests' AfterBuild target will be skipped if
UnitTests doesn't need to be rebuilt. (Note that UnitTests always needs
to be rebuilt if SCMRevGen changed.)
I haven't seen these problems with DolphinQt's rather similar
input/output tracking. This may be because DolphinQt's one also has the
exe file as an input/output.
`std::bit_cast` participates in overload resolution only if `sizeof(To) == sizeof(From)` and both `To` and `From` are *TriviallyCopyable* types, so the static assertions here can be removed. `[[nodiscard]]` was added as well.
Like the previous commit, but for UnitTests. This time all operating
systems were affected.
I also made UnitTests.vcxproj use the same way of copying as
DolphinQt.vcxproj, just for consistency.
For a long time now, we've had a problem where game INIs persist in
the copied Sys folder if they've been deleted from the original Sys
folder. (I still have hundreds of game INIs locally that only set
EmulationStateId, and we removed those game INIs 6 years ago. On the
buildbot, we do occasionally clear out the build directories manually,
so I'd assume it's not quite as bad there.)
This commit fixes the problem by deleting the output Sys folder before
copying the original Sys folder to the output Sys folder. This should be
a bit slower, but in my testing, the difference seems small. At least if
you have an SSD, which I really hope people have nowadays!
Operating systems other than Windows have not been touched, because:
* Android: Already explicitly deletes the output Sys folder.
* macOS: Does some magic to put the Sys folder in the app bundle, which I
will simply assume isn't affected by this problem, without testing.
* Linux: Expects the person building to manually manage the Sys folder.
Update the checkmarked slot in the Select State Slot menu when the
Increase Selected State Slot or Decrease Selected State Slot hotkeys are
pressed.
The actual selected save slot was being changed correctly before this
commit; this just fixes the menu checkmark.
The biquad filter is used in all Pikmin games for cursor sound effects
in the main menu, although the difference is subtle.
The low-pass filter is used at least by Pikmin 2 Wii during the
spaceship crash in the intro and fixes the missing "puff" sound effects
whenever there is black smoke coming out of the engine.
With this change, a different message is displayed if starting a game with RetroAchievements fails due to the Dolphin version being blocked as opposed to failing because the game hash is unsupported.
This compile definition was removed in 68cbd2640d because it was complicated by changes in 50dc0ffbce. Thus, the LLVM disassembler would never be used in UICommon's Disassembler class.
With our current setup, we use the --deep option, which should be avoided.
This tool signs bundles in the "correct" way as recommended by Apple (each Mach-O individually, from the inside-out).
In a race condition, the core could shut down between the `JitInterface::GetCore` nullptr check and the `JitInterface::JitBlockLogDump` call which constructs a `CPUThreadGuard`. In this scenario, nothing horrible happens—`JitBlockLogDump` also checks for a nullptr—but it would be a failure to display the correct feedback to the user.
To fix the crash in input device sensor handling, we should look up
Sensors using structural equality. Unfortunately, Sensor.equals
implements referential equality, and HashMap doesn't let us provide a
custom comparator. Because the number of sensors is relatively small,
and because we have a reason to keep a sorted list of sensors around
anyway, let's switch from HashMap to ArrayList.
`Layer::Save` only does its thing if the layer has `is_dirty == true`.
But SYSCONF could have been modified by other layers, so if the base layer wasn't made dirty by anything else, then it wouldn't be restored.
Fixes https://bugs.dolphin-emu.org/issues/13580
I tried making the new templated Interpret callback test only the relevant exceptions (EXCEPTION_DSI, EXCEPTION_PROGRAM, or both), but didn't find a significant performance boost in it. As I am learning, the biggest bottleneck is the number of callbacks emitted, not usually the actual contents of them.
WritePC is now needed far less, only for instructions that end the block. Unfortunately, WritePC still needs to update `PowerPCState::npc` to support the false path of conditional branch instructions. Both drawbacks should be smoothed over by optimized cached instructions in the future.
Use QObject->deleteLater() instead of the delete operator to destroy
child widgets of the layout. This prevents crashes caused by pending
events trying to access the now-destroyed widget.
The player_index field in question is ultimately what gets used to determine which ranks get displayed in the leaderboards chart, and because this was missing the chart was simply displaying the top four results no matter what.
The cause of the leaderboard spam was primarily this call where if there was an attempt to get leaderboard info and there wasn't already, there would be a fetch request. This is bad for many reasons: some games have hundreds of boards that will be fetched at startup, if there's simply no data to populate that board, this will just continue to fetch every time the dialog needs to update. To mitigate this, I simply don't load leaderboard information until there are events for that leaderboard - less information for the player, sadly, but heavily cuts down on the number of leaderboard fetches.
Now that we have some test data, it wasn't showing up in the leaderboards tab; this fixes it to ensure (1) that the right ID is being passed to UpdateRow and (2) the map of leaderboard entries is being populated correctly.
Currently we're showing OSD messages for unknown patches in known INI
files, but not for unknown patches in unknown INI files. I don't think
this distinction makes much sense to the user. If there's a patch the
user can't use, they probably want to be aware of that fact.
0c14b0c8a7 made Dolphin load a file from
the Sys folder the first time AchievementManager::GetInstance() is
called. Because Android calls AchievementManager::GetInstance() from
setBackgroundExecutionAllowedNative, this had two negative consequences
on Android:
1. The first time setBackgroundExecutionAllowedNative gets called is
often before directory initialization is done. Getting the path of
the Sys folder before directory initialization is done causes a crash.
2. setBackgroundExecutionAllowedNative is called from the GUI thread,
and we don't want file I/O on the GUI thread for performance reasons.
This change makes us load the data from the Sys folder the first time
the data is needed instead. This also saves us from having to load the
data at all when hardcore mode is inactive.
We mustn't use m_system when it is nullptr. This was causing Dolphin to
crash on Android whenever an activity was recreated or resumed while
emulation is running, which is super common.
This unit test compares ApprovedInis.json with the contents of the GameSettings folder to verify that every patch marked allowed for use with RetroAchievements has a hash in ApprovedInis.json. If not, that hash is reported in the test logs so that the hash may be updated more easily.
Prototype of a system to whitelist known game patches that are allowed to be used while RetroAchievements Hardcore mode is active. ApprovedInis.txt contains known hashes for the ini files as they appear in the repo, and can be compared to the local versions of these files to ensure they have not been edited locally by the player. ApprovedInis.txt is hashed and verified similarly first, with its hash residing as a const string within AchievementManager.h, ensuring ApprovedInis and the hashes within cannot be modified without editing Dolphin's source code and recompiling completely.
The challenge popups have proven to be excessive and are no longer useful thanks to the achievements hotkey. Instead, those events will ask for an immediate RP-level update to the achievements dialog, which will among other things re-sort the dialog to show challenges on top faster.
This way, by pressing Continue on top of a breakpoint, the emulation will actually continue (like on Cached Interpreter and JIT), instead of doing nothing.
Before:
1. In theory there could be multiple, but in practice they were (manually) cleared before creating one
2. (Some of) the conditions to clear one were either to reach it, to create a new one (due to the point above), or to step. This created weird behavior: let's say you Step Over a `bl` (thus creating a temporary breakpoint on `pc+4`), and you reached a regular breakpoint inside the `bl`. The temporary one would still be there: if you resumed, the emulation would still stop there, as a sort of Step Out. But, if before resuming, you made a Step, then it wouldn't do that.
3. The breakpoint widget had no idea concept of them, and will treat them as regular breakpoints. Also, they'll be shown only when the widget is updated in some other way, leading to more confusion.
4. Because only one breakpoint could exist per address, the creation of a temporary breakpoint on a top of a regular one would delete it and inherit its properties (e.g. being log-only). This could happen, for instance, if you Stepped Over a `bl` specifically, and pc+4 had a regular breakpoint.
Now there can only be one temporary breakpoint, which is automatically cleared whenever emulation is paused. So, removing some manual clearing from 1., and removing the weird behavior of 2. As it is stored in a separate variable, it won't be seen at all depending on the function used (fixing 3., and removing some checks in other places), and it won't replace a regular breakpoint, instead simply having priority (fixing 4.).
Dolphin currently fails to build when the Linux system building it includes headers/pkgconfigs for minizip-ng built in both minizip-ng mode and legacy compat mode (the minizip API).
This is because minizip-ng is checked for in cmake however the code is not actually compatible against minizip-ng built in non-legacy mode. Until that is rectified Dolphin should just check for a pkgconfig for minizip. If the system has a pkgconfig for minizip with a version >= 4 then the system package is minizip-ng built in compat mode which is exactly what we want.
Now it actually does what it says on the name, instead of creating a breapoint and doing nothing else (not even updating the widget).
Also, it now can't be selected if emulation isn't running.
Closes https://bugs.dolphin-emu.org/issues/13532
Change misleading names.
Fix function usage: Intepreter and Step Out will not check breakpoints in their own wrong way anymore (e.g. breaking on log-only breakpoints).
By request from delroth, I changed the name of our Transifex
organization so it's named after the Dolphin project rather than after
him. This broke old links and the .tx/config file.
There are two pieces of functionality to be added here. One, we want to disallow pausing too frequently, as it may be used as an artificial slowdown. This is handled within the client, which can tell us if a pause is allowed. Two, we want to call rc_client_idle on a periodic basis so the connection with the server can be maintained even while the emulator is paused.
When the immediate value is zero, we can do a negation. On ARM64 the NEG
/NEGS instructions are just an alias for SUB/SUBS with a hardcoded WZR.
Before:
```
ldr w22, [x29, #0x28]
mov w21, #0x0 ; =0
subs w22, w21, w22
```
After:
```
ldr w22, [x29, #0x28]
negs w22, w22
```
bugfix: SetQWidgetWindowDecorations(this); not called before show() for Windows darkmode titlebars.
The actual call to (QWidget) show() needed to come sooner. Show() was originally left alone, but with other checks needing to move with (QWidget) show(), this function became less useful. Show() was originally created to fix the render widget appearing behind the main window, but that appears to work fine in this iteration.
Storing the log type names in a map results in them getting re-sorted by
their keys, which doesn't quite give us the sorting we want. In
particular, the Achievements category ended up being sorted at R (for
RetroAchivements) instead of at A. Every use of the map is just
iterating through it, so there's no real reason why it has to be a map
anyway.
Previously the Achievements option would only show up if achievements were already enabled, requiring users to manually create a config file in the file system; this now makes it visible no matter what.
Normally, the asserts added in 34b0a6ea90 are only triggered when
something actually went wrong in Dolphin. But there is one exception:
In FallBackToInterpreter, we flush all registers regardless of whether
they're discarded. This is fine as long as none of the discarded
registers are inputs to the instruction that the interpreter will run.
To avoid false positive asserts, this change adds a parameter to Flush
that controls whether to skip the asserts for discarded registers.
Additionally, an assert for discarded registers is added to
Arm64FPRCache::Flush. (Previously JitArm64 asserted for GPRs (and CRs)
only, whereas Jit64 asserted both for GPRs and FPRs. I most likely
didn't think of FPRs when writing 34b0a6ea90.)
When the inverted depth range is unsupported and zRange is greater than farZ then min_depth becomes a negative value and far_depth will then exceed a depth of 1.0 (which is outside the scope of most backends and greater than GX_MAX_DEPTH of the console).
This happens when the backend supports depth clamping the min_depth is not clamped to zero.
2023-09-28 04:17:56 +01:00
2402 changed files with 158877 additions and 157844 deletions
set(USE_SYSTEM_${upperlib}""CACHESTRING"Use system ${library} instead of bundled. ON - Always use system and fail if unavailable, OFF - Always use bundled, AUTO - Use system if available, otherwise use bundled, blank - Delegate to USE_SYSTEM_LIBS. Default is blank.")
message(FATAL_ERROR"Couldn't find libudev. Can't build hardware database.\nDisable ENABLE_HWDB if you wish to build without hardware database support")
This guide is for developers who wish to contribute to the Dolphin codebase. It will detail how to properly style and format code to fit this project. This guide also offers suggestions on specific functions and other varia that may be used in code.
This guide is for developers who wish to contribute to the Dolphin codebase. It details how to properly style and format code for this project. This guide also offers suggestions on specific functions and other elements that may be used in code.
Following this guide and formatting your code as detailed will likely get your pull request merged much faster than if you don't (assuming the written code has no mistakes in itself).
Following this guide and formatting your code as detailed will likely get your pull request merged much faster than if you don't (assuming the code itself has no mistakes).
This project uses clang-format (stable branch) to check for common style issues. In case of conflicts between this guide and clang-format rules, the latter should be followed instead of this guide.
This project uses clang-format 19.1 to check for common style issues. In case of conflicts between this guide and clang-format rules, the latter should be followed instead of this guide.
## <a name="intro-formatting-issues"></a>Checking and fixing formatting issues
@ -49,7 +49,7 @@ In most cases, clang-format can and **should** be used to automatically reformat
- Formatting issues can be checked for before committing with a lint script that is included with the codebase. To enable it as a pre-commit hook (assuming you are in the repository root):
@ -189,7 +189,7 @@ Summary:
## <a name="cpp-code-general"></a>General
- The codebase currently uses C++20, though not all compilers support all C++20 features.
- See CMakeLists.txt "Enforce minimium compiler versions" for the currently supported compilers.
- See CMakeLists.txt "Enforce minimum compiler versions" for the currently supported compilers.
- Use the [nullptr](https://en.cppreference.com/w/cpp/language/nullptr) type over the macro `NULL`.
- If a [range-based for loop](https://en.cppreference.com/w/cpp/language/range-for) can be used instead of container iterators, use it.
- Obviously, try not to use `goto` unless you have a *really* good reason for it.
@ -227,7 +227,7 @@ Summary:
## <a name="cpp-code-functions"></a>Functions
- If a function parameter is a pointer or reference and its value or data isn't intended to be changed, please mark that parameter as `const`.
- Functions that specifically modify their parameters should have the respective parameter(s) marked as a pointer so that the variables being modified are syntaxically obvious.
- Functions that specifically modify their parameters should have the respective parameter(s) marked as a pointer so that the variables being modified are syntactically obvious.
# Values set here will override the Dolphin DSP settings.
EnableJIT=True
[OnLoad]
# Add memory patches to be loaded once on boot here.
[OnFrame]
# Add memory patches to be applied every frame here.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
